The material for SANDAO two part adhesive is carefully selected. Such properties and behaviors as strength, hardness, durability, flexibility, weight, resistance to heat and corrosion, electrical conductivity, and machinability are required. 2.
It delivers good building energy performance. Relative performance is measured when possible using various analysis software such as Ecotect and EnergyPlus. Designs are tuned based on the results. 3.
The product is distinctive for its electrical strength. The insulation materials are able to withstand the maximum electric field without the problem of losing insulation performance. 4.
The price of this product is competitive, very popular in the market and has huge market potential.
Epoxy resin AB adhesive SD811
Epoxy resin AB adhesive SD811 is a two-component high-temperature resistant adhesive based on epoxy resin. It has high strength, weak acid-base resistance, impact resistance, low smell, resistance to most chemical media, extreme temperature and excellent electrical insulation characteristics. Mainly suitable for high temperature resistant metal, ceramic, etc.
◪ Fast curing, wide range of application, high bonding strength, water resistance, oil resistance, fatigue resistance.
◪ Excellent resistance to high and low temperature, can work in the temperature range of 60-150 ℃.
Sandao Epoxy resin AB adhesive are used for bonding of metal, ceramic, glass, electroplating / paint / magnetic materials, such as aircraft motor, automobile, machinery, ship, electronics, electrical apparatus, instrument, building, furniture, toys,. high temperature resistant parts such as railway vehicles ,etc, AB glue can also be used to adhesive water tank, oil road, carburetor, cylinder cover, exhaust pipe, bushing of driving shaft, plastic parts such as baffle, vehicles lamp glass, car handle, etc.
Electroplating paint bonding
Mechanical component bonding
|Epoxy resin AB glue||SD811 part A||SD811 part B|
|Viscosity (mPa.s 25℃)||8000-12000||10000-13000|
|Specific gravity (g/ml 25℃)||1.0-1.05||1.0-1.05|
|Ratio（weight ratio pbw）||1||1|
|Gel time under normal temperature（25℃）20g||45-60mins|
|Curing time|| 80℃||30mins|
|Active hydrogen equivalentg/eq||/||185/195|
|Distortion temperature HDT||80℃|
|Solume resistivity（Ω.cm）25℃||1.0~1015 |
|Surface resistivity（Ω.cm）25℃||0.9×1015 |
|Shear strength of different materials（Mpa）|
|Aluminum / copper||16-19|
Transparent epoxy resin AB glue
SD811 Epoxy AB Adhesive is an epoxy resin two component high Temperature adhesive.
Fast curing speed, wide application range, extreme temperature and excellent electrical insulation characteristics.
Green environmental protection
odorless, non-pollution, high strength, weak acid and alkali resistance, impact resistance, high adhesion strength, water resistance, oil resistance, fatigue resistance.
AB mixing tube
packaging specifications: 64g / tube.
Put on AB glue gun and put on the thread mixing head.
The thickness of adhesive layer should be 0.05mm, the coated object should be clamped immediately, and the maximum bonding strength will be guaranteed by uniform contact pressure.
To obtain the highest mechanical strength, the surface of the material can be polished or sandblasted, and then the dust and oil stains on the surface can be scrubbed with a special solvent.
Adhesive should be put on both sides of the object and fix the splice in avoid of dislocation. Do not mix the lid of A and B to prevent contamination of the adhesive.
1. Epoxy resin AB glue is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Packaging and preservation
Epoxy resin AB sealant is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods, should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.Company Features1.
Huizhou SANDAO New Material Co., Ltd is a large scale hi-tech company specializes in epoxy resin . 2.
Huizhou SANDAO New Material Co., Ltd has strong economic strength and technological strength. 3.
We are full of confidence in our quality 2 part epoxy adhesive. Get an offer! We can promise high quality and excellent service for two part adhesive . Get an offer! We strive to grow even more. Our aim is to establish long-term relationships with prospective buyers. For this, we only deliver the best to gain trust in their respective markets. Get an offer! We are committed to playing a key role in achieving a sustainable future. We promote responsible and ethical business practices, actively support the activities of the communities in which we live and work and foster environmentally sound operations.