This rtv silicone rubber has many virtues such as what is rtv silicone and so on. 2.
It is in high accordance with the first-class quality inspection standards. 3.
The supplied product can always be serviced in the best conditions. 4.
The leading and supporting role of what is rtv silicone concept is a magic weapon that inspires Huizhou SANDAO New Material Co., Ltd to overcome difficulties and advance continuously. 5.
Grasping what is rtv silicone critical technologies improves Huizhou SANDAO New Material Co., Ltd's independent rtv silicone rubber developing ability.
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.
The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.
Microwave oven adhesive seal
Radiator filling and bonding
Refrigerator bonding seal
Semiconductor material bonding
Thyristor filling and bonding
|Tensile strength (MPa)||≥2.5||≥2.5||≥2.5|
|Hardness (shore A)||50～65||50～65||50～65|
|Thermal conductivity（w/(m.k)） ||1.2||0.8||2.0|
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle
Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
As an experienced manufacturer of what is rtv silicone, Huizhou SANDAO New Material Co., Ltd is renowned for strong capabilities of designing and manufacturing high-quality products. 2.
Our easy operating rtv silicone makes rtv silicone rubber more prompt and convenient. 3.
Huizhou SANDAO New Material Co., Ltd will set up a management mode that takes the customer's demand as the direction. Inquire online! Creating what is rtv silicone through our advanced technology and professional team is our persistent goal. Inquire online! Huizhou SANDAO New Material Co., Ltd tries to structure what is rtv silicone as its service ideology. Inquire online! what is rtv silicone is our tenet to do the business for our costumers. Inquire online!