SANDAO  > 

AI - Page Sitemap

 > 

SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts

SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts

SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts
Application Scope
SANDAO New Material's silicone rubber is mainly used in the following aspects.In addition to providing high-quality products, SANDAO New Material also provides effective solutions based on the actual conditions and the needs of different customers.
Company Advantages
1. The design of SANDAO ge rtv silicone resorts to advanced technologies. It is created using CAD and CAM which lay a solid foundation for the optimized design.
2. Two-component addition-type potting adhesive TDS is applied to ge rtv silicone for its merits of ge rtv silicone.
3. Two-component addition-type potting adhesive TDS adopts principle of ge rtv silicone, integrated advantages of ge rtv silicone.
4. Some of our customers say it is worthy because it fits perfectly their lifestyle, washing, cooking, as well as storage habits.
5. This product is designed with the durability to meet the daily demands of high-traffic areas such as offices, hotels, or homes.

our product

bg


SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-2

air conditioning

SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-3

heat sink

SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-4

Induction cooker bonding


SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-5

PCB board bonding

SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-6

Power module

SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
SANDAO high-quality Two-component addition-type potting adhesive TDS certifications for rubber parts-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. Over the years, Huizhou SANDAO New Material Co., Ltd has been concentrating on the design, production, and supplying of ge rtv silicone. We are a qualified manufacturer and supplier.
2. All the technical standards of SANDAO Two-component addition-type potting adhesive TDS are stricter than national and international standards.
3. We operate our business according to the highest ethical standards and treat all of our co-workers, customers, and suppliers with honesty, integrity, and respect. We enforce the standards in our Supplier Code of Conduct with our manufacturing suppliers and review environmental practices during audits of such suppliers. We concern the environment and the future. We will occasionally carry out training sessions for production workers on the issues of water pollution control, energy conservation, and environmental emergency management.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...