SANDAO ms polymer adhesive is manufactured by highly skilled professionals with rich years of experiences in the industry. 2.
This product is highly safe. It is equipped with an electrical protection system to avoid risks such as leakage, over current and overheating. 3.
The product has stable electric performance. Its circuit boards and other electrical components are sophisticatedly soldered to guard against any external influence. 4.
Huizhou SANDAO New Material Co., Ltd has good communication and marketing ability. 5.
Huizhou SANDAO New Material Co., Ltd is certified to all relative certificates that is needed for MS adhesive series.
Healthy antimicrobial and anti-mildew adhesive SD858
In daily life, black mold breeding phenomenon everywhere, not only caused the pollution of the living environment, but also long-term harm to people's physical and mental health;
Sandao Healthy antimicrobial and anti-mildew adhesive D858 is a professional anti-mildew antibacterial sealant, compared with the ordinary anti-mildew gel on the market, D858’s polymer structure can more effectively inhibit the breeding of mold, the protection time is longer.
There is no formaldehyde, no toluene, no solvent, no isocyanate, no toxic and tasteless, the content of volatile organic compounds （VOC）is almost 0, the product itself is healthy and environmental protection, the mildew prevention performance is longer, more outstanding.
Multifunctional adhesives can be used for bonding, sealing and repairing cracks.
High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.
Viscosity (pa.s) 10rpm
Initial curing time（mins）
|100% modulus (Mpa)||1.2|
|Elongation at break（N/mm）||230|
SD858 Antibacterial and Antifungal Adhesive
SD858 is a professional anti-mildew and anti-bacterial sealant. The macromolecule structure can more effectively inhibit the growth of mildew, and the protection time is longer.
The polymer network structure firmly locks the antibacterial property, inhibits the growth of mold, and has a longer aging time.
Green environmental protection
Formaldehyde free, no toluene, no solvent, no isocyanate, non-toxic and tasteless
Store in a cool and dry place under normal temperature, storage period is 12 months.
The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .
1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.
Huizhou SANDAO New Material Co., Ltd enjoys an increasing reputation in the field of ms polymer adhesive, and gradually takes an important role. 2.
In order to improve market competitiveness, SANDAO is mainly spent in optimizing technology production of MS adhesive series. 3.
In an effort to achieve environmental sustainability, we strive hard to make advancements in upgrading our original production model, including resource utilization and wastes treatment. We strive for customer satisfaction via a powerful combination of people and plant, innovative techniques and an integrated approach from prototype to production. Check now!