There are many factors influence the design of SANDAO what is rtv silicone. They are size, weight, required motion, labor required, speed of operation, etc. 2.
what is rtv silicone is used for protection to control the rtv silicone rubber . 3.
The product enjoys high reputation in the market and has a great market application prospect. 4.
This product has a wide range of application requirements on the market.
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.
The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.
Microwave oven adhesive seal
Radiator filling and bonding
Refrigerator bonding seal
Semiconductor material bonding
Thyristor filling and bonding
|Tensile strength (MPa)||≥2.5||≥2.5||≥2.5|
|Hardness (shore A)||50～65||50～65||50～65|
|Thermal conductivity（w/(m.k)） ||1.2||0.8||2.0|
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle
Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Huizhou SANDAO New Material Co., Ltd has been an important market player of what is rtv silicone for years. We are renowned as an expert in R&D, design, and production. 2.
We have implemented strict product development, production and quality management systems. This can ensure all of our products to comply with international quality standards. 3.
Diversity and inclusion have brought tremendous value to our company. We will ensure that a diverse workforce will be set up to promote our business. The goal of our company is to provide perfect product quality to win the trust of our customers at home and abroad. Our firm bears societal responsibilities. We support raw material suppliers that promote “green” methods of production and use recycled materials, that contribute to a healthy environment. We see sustainability as our responsibility to contribute to a sustainable future in all possible aspects of our business. We put special emphasis on reducing our CO2 emissions, increasing energy efficiency, and minimizing waste.