Company Advantages1. SANDAO what is rtv silicone has to go through a wide range of production processes, including material washing, CNC cutting, welding, plating, chemical spraying, and so on.
2. Thanks to its special what is rtv silicone and its high-tech rtv silicone , One-component RTV silicone rubber TDS adds high-end experience to any user.
3. The functionality of the product has been significantly optimized by our competent and dedicated researchers.
4. The product can last more than a couple of seasons. It can keep the same shape when people bought them and will neither stretch out nor shrink over time.
5. The presence of this product in a space will make this space a substantial and functional unit. - Said one of our customers.
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.
The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.
Microwave oven adhesive seal
Radiator filling and bonding
Refrigerator bonding seal
Semiconductor material bonding
Thyristor filling and bonding
Type | SD916 | SD9201 | SD920 |
Color | white | white | white |
Viscosity(cp) | paste | paste | semi-fluid |
Density(g/cm3) | 2.0~2.5 | 2.0~2.5 | 3.0~3.5 |
Tack-free time(25℃,min) | ≤30 | ≤30 | ≤30 |
Tensile strength (MPa) | ≥2.5 | ≥2.5 | ≥2.5 |
Elongation(%) | ≥100 | ≥100 | ≥100 |
Shear strength(MPa) | ≥1.5 | ≥1.5 | ≥1.5 |
Hardness (shore A) | 50~65 | 50~65 | 50~65 |
Temperature range(℃) | -60~280 | -60~280 | -60~280 |
Dielectric intesity(kV/mm) | ≥18 | ≥18 | ≥18 |
Permittivity(@60Hz) | 2.8 | 2.8 | 2.8 |
Volume Resistance(Ω.cm) | 1×1015 | 1×1015 | 1×1015 |
Thermal conductivity(w/(m.k)) | 1.2 | 0.8 | 2.0 |
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
Eco-environmental protection
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
White paste
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle
Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.
Notes:
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Company Features1. In the fierce market competition, Huizhou SANDAO New Material Co., Ltd survives and stands out of the market based on quality what is rtv silicone.
2. SANDAO has a complete One-component RTV silicone rubber TDS production laboratory, which can produce more elaborate products.
3. We are committed to providing high-quality services and products. We meet the mutually agreed-to requirements the first time and strive for continuous improvement of our work processes. Get more info! We look forward to cooperating with friends from all walks of life to create the first rtv silicone brand in the industry. SANDAO will constantly adjust itself to suit the requirements of customers. Get more info! Excellent customer service is what we strive for. We strive to deliver excellent product solutions and services to our customers, and we will improve ourselves through the feedback from our customers. Get more info!