superior Thermal conductive material TDS general vendor for heat sink

our product

SANDAO general Thermal conductive material TDS vendor for heat sink-1

General type heat conductive silicone grease SD910

General type heat conductive silicone greaseSD910 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.

Application

Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.

SANDAO general Thermal conductive material TDS vendor for heat sink-2

High power triode

SANDAO general Thermal conductive material TDS vendor for heat sink-3

LED heat dissipation gap filling

SANDAO general Thermal conductive material TDS vendor for heat sink-4

Oven gap filling

SANDAO general Thermal conductive material TDS vendor for heat sink-5

Power module

SANDAO general Thermal conductive material TDS vendor for heat sink-6

Thyristor component

SANDAO general Thermal conductive material TDS vendor for heat sink-7

CPU gap filling

product Performance

Performance	Test data
Appearance	Gray paste
Penetration degree（1/10mm，25℃）	270～340
Specific gravity（g/cm3）	2.6-3.0
Bleed（%。150℃，8h）	≤3.0
Fugitive constituent（%。150℃，8h）	≤2.0
Break down strength（kv/mm）	≥5.0
Volume resistivity（Ω.cm）	4×10¹⁴
Thermal conductivity（w/m·k）	≥1.0

Product details

SANDAO general Thermal conductive material TDS vendor for heat sink-8

General purpose thermal grease

SD910 Universal Thermal Grease is a one-component silicone thermal grease Based on imported silicone.

SANDAO general Thermal conductive material TDS vendor for heat sink-9

Gray paste

Non- toxic, non- corrosive, tasteless, non - drying, non - soluble, no air - drying hardening or melting.

SANDAO general Thermal conductive material TDS vendor for heat sink-10

Green environmental protection

High temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulation, good service stability.

SANDAO general Thermal conductive material TDS vendor for heat sink-11

Iron bottle packaging

packaging specifications: 1.0kg /can

Use instructions

Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.

Caution

The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.

Packaging and preservation

Packing specification: 1.0kg/ can, negotiable to according to the user's needs.

Storage: store in a cool and dry place for one year.

Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.

Company Features
1. Supported by plenty of fund, Huizhou SANDAO New Material Co., Ltd can be devoted to R&D and technology and keeps improving performance of Thermal conductive material TDS.
2. We have a strong development team who is equipped with many-core technologies knowledge. They have successfully released a series of products which are loved by many customers.
3. We are always committed to becoming the top brand in the world Thermal conductive material TDS industry. Contact us! Huizhou SANDAO New Material Co., Ltd aims to take the lead in the field of gas resistant rtv through continuous innovation. Contact us! With ambition, SANDAO aims to be the most competitive gas resistant rtv supplier. Contact us! The SANDAO's brand desire is to become the leading gas resistant rtv supplier. Contact us!

q******h

SANDAO gas resistant rtv has a wide selection of design styles, enabling to fulfill the needs of the most demanding clients.

u******m

SANDAO Thermal conductive material TDS is designed to set apart from competitors.

e******z

SANDAO gas resistant rtv is produced to meet the quality standards as per the customer demands.

p******e

SANDAO Thermal conductive material TDS is processed by specialized and highly efficient production lines.

l******o

gas resistant rtv perfectly combines art and innovation.

x******u

This product has been officially certified according to industry quality standards.

Product Message

*Name

Phone

*E-mail

*Content

SANDAO general Thermal conductive material TDS vendor for heat sink