SANDAO  >  AI - Page Sitemap  >  SANDAO gel rtv silicone rubber wholesale for converter
SANDAO gel rtv silicone rubber wholesale for converter

SANDAO gel rtv silicone rubber wholesale for converter

Model number
SD916
MOQ
1pcs
Color
white paste/white semi-fluid
Package
150ml/pcs, 310ml/pcs, 2.6L/pcs
Main characteristic
Thermal conductivity is 1.2
Main application
bonding between CPU and heat sink, the high-power electrical module etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • With a focus on service quality, SANDAO New Material guarantees the service with a standardized service system. Customer's satisfaction would be improved by the management of their expectations. Their emotions will be comforted through professional guidance.
Company Advantages
1. SANDAO rtv silicone has to go through the following processes. They include CAD/CAM design, procurement of raw materials, fabrication, welding, spraying, assembly, and commissioning.
2. By a rounded analysis of rtv silicone , rtv silicone rubber is considered as a what is rtv silicone good in both rtv silicone .
3. It has been widely recognized that SANDAO always apply rtv silicone to let our customers assured.
4. SANDAO is powerful enough to provide professional rtv silicone rubber service.

our product

bg


SANDAO gel rtv silicone rubber wholesale for converter-1
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.

Application

bg


The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.

SANDAO gel rtv silicone rubber wholesale for converter-2

Microwave oven adhesive seal

SANDAO gel rtv silicone rubber wholesale for converter-3

Radiator filling and bonding

SANDAO gel rtv silicone rubber wholesale for converter-4

Refrigerator bonding seal


SANDAO gel rtv silicone rubber wholesale for converter-5

Semiconductor material bonding

SANDAO gel rtv silicone rubber wholesale for converter-6

Thyristor filling and bonding

SANDAO gel rtv silicone rubber wholesale for converter-7

CPU bonding



product Performance

bg


TypeSD916SD9201SD920
Colorwhitewhitewhite
Viscosity(cp)pastepastesemi-fluid
Density(g/cm3)2.0~2.52.0~2.53.0~3.5
Tack-free time(25℃,min)≤30≤30≤30
Tensile strength (MPa)≥2.5≥2.5≥2.5
Elongation(%)≥100≥100≥100
Shear strength(MPa)≥1.5≥1.5≥1.5
Hardness (shore A)50~6550~6550~65
Temperature range(℃)-60~280-60~280-60~280
Dielectric intesity(kV/mm)≥18≥18≥18
Permittivity(@60Hz)2.82.82.8
Volume Resistance(Ω.cm)1×10151×10151×1015
Thermal conductivity(w/(m.k)) 1.20.82.0

Product details

bg
SANDAO gel rtv silicone rubber wholesale for converter-8
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
SANDAO gel rtv silicone rubber wholesale for converter-9
Eco-environmental protection
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
SANDAO gel rtv silicone rubber wholesale for converter-10
White paste
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
SANDAO gel rtv silicone rubber wholesale for converter-11
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle

Use instructions

bg


  • Cleaning the surface of the adhered or coated object to remove rust, dust and oil.

  • Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.

  • Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.

Notes:

  • 1.   Keep thermal paste out of reach of children.

  • 2.   Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.


Company Features
1. Huizhou SANDAO New Material Co., Ltd has grown to become a national market leader for rtv silicone rubber due to our continuously designing and manufacturing One-component RTV silicone rubber TDS.
2. Without the support of QC team in SANDAO, it is hard to say the quality of rtv silicone rubber can be assured.
3. It is our firm intention to increase product quality over the entire product life cycle. So we will strive towards sustainable improvement of the product quality system and further training of our employees. We are constantly striving to find more sustainable solutions. We consciously minimize the environmental impact during the entire life cycle of our products, including recycling and disposal.
SANDAO rtv silicone is developed professionally by our R&D team who have many years of experience in the battery industry. Parameters such as electrolyte types, metal ingredients, and battery cells have been considered respectively. With DEX technology, it ensures the accuracy of cash accountability
SANDAO rtv silicone has to be processed with fine finishing so as to eliminate the impurities to further develop its full gloss potential. It has alert functions for fault diagnosis
The safety of SANDAO what is rtv silicone is guaranteed. It has been tested with regards to fire resistance rating by the third-party testing laboratory. It can be designed with an electronic screen for advertising and the screen size is optional
SANDAO One-component RTV silicone rubber TDS is strictly inspected. It will be ensured that the edges are uniform around all sides and be reviewed from multiple angles. The shopping cart function makes the handling of payment and transactions a lot easier
SANDAO rtv silicone is the outcome of comprehensive know-how. It is developed under these several considerations: electric control system, electromagnetism, insulation materials selection, the design of printed circuit boards, and so on. Its body is designed to restrict UV rays, light, and heat transmission
The product will not shrink when washed. Its materials have been relaxed and contracted prior to manufacturing so as to no further shrinkage. It can be designed with an electronic screen for advertising and the screen size is optional
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...