Before delivery, SANDAO rtv silicone rubber has to go through final random inspections. This aims to ensure that it is consistent and compliant with different countries' certifications such as CE, EU, CCC, and BEAB. 2.
This product is breathable and soft. It uses ultra-thin threads in a tightly spun mesh that feels incredibly soft while staying breathable. 3.
The product has received wide reception in the market for its good economic benefits. 4.
The product can meet varied demands of our clients and is being used more and more widely in the global market.
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.
The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.
Microwave oven adhesive seal
Radiator filling and bonding
Refrigerator bonding seal
Semiconductor material bonding
Thyristor filling and bonding
|Tensile strength (MPa)||≥2.5||≥2.5||≥2.5|
|Hardness (shore A)||50～65||50～65||50～65|
|Thermal conductivity（w/(m.k)） ||1.2||0.8||2.0|
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle
Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Huizhou SANDAO New Material Co., Ltd takes an important role in the R&D, design, and manufacture of rtv silicone rubber in the domestic market. 2.
We have established long-term cooperation with customers. We have built up mutual trust and achieved a win-win situation over the years. Time has proved to us that they are our loyal customers. 3.
We have set up sustainability goals to reduce greenhouse gas emissions, energy consumption, solid landfill waste, and water consumption. We have positioned the environment as a priority management issue. We promote environmental management in all regions around the world and in all fields while collaborating and cooperating with related companies, business partners, and employees.