SANDAO  > 

AI - Page Sitemap

 > 

SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products

SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products

SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products
Enterprise Strength
  • SANDAO New Material serves every customer with the standards of high efficiency, good quality, and rapid response.
Application Scope
silicone rubber has a wide range of applications. It is mainly used in the following industries and fields.SANDAO New Material is dedicated to solving your problems and providing you with one-stop and comprehensive solutions.
Company Advantages
1. SANDAO ge rtv silicone is manufactured under the strict scrutiny of our experienced team.
2. This product is somewhat chemical resistant. It has passed the chemical resistance testing for oils, acids, bleaches, tea, coffee, and so forth.
3. The product is safe to use. Its wood/metal/leather materials, glue agent, coatings or wax does not embrace any harmful substances.
4. ge rtv silicone plays an important role for the development of SANDAO.

our product

bg


SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-2

air conditioning

SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-3

heat sink

SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-4

Induction cooker bonding


SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-5

PCB board bonding

SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-6

Power module

SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
SANDAO fine- quality Two-component addition-type potting adhesive TDS for electrical products-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. The capacity for Two-component addition-type potting adhesive TDS is big enough to supply many customers at same time.
2. We have many experienced technicians. They are able to guide clients through from conception to order completion by using their professional knowledge and expertise.
3. Our goal is to improve customer service in a significant way. We will endeavor to localize all the product services by establishing our branch companies for the worldwide channel to guarantee 100% customer satisfaction. We are committed to building a positive corporate culture. We encourage employees to think outside the box to communicate and share their creativity or ideas on improving the products or customer service. Hence we can utilize their creativity drives business success. We insist on integrity. In other words, we adhere to ethical standards in our business activities, respect customers and employees, and promote responsible environmental policies. Check now!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...