The appealing design of SANDAO epoxy adhesive allows customers to enjoy the aesthetics. 2.
This product is anti-pill, wrinkle-free, and provide long-lasting color, which is all due to the steps taken during the finishing process. 3.
With a design-friendly paint scheme, this product is available in many different colors which will fit in nicely with the bedroom décor. 4.
By choosing this product, one can live a unique lifestyle, enjoy a one-of-a-kind home, as well as minimize the carbon footprint and the effect on the environment.
Electronic parts bonding potting adhesive SD868
Metal & plastic adhesive AB glue SD868 is a two-component high-temperature resistant adhesive based on epoxy resin. It has advantage of high strength, weak acid and alkali resistance, impact resistance, low smell, resistance to most chemical media, extreme temperature and excellent electrical insulation. Mainly suitable for high temperature resistant metal, ceramic, etc.
◪ Electronic parts bonding potting adhesive SD868 has the advantages of fast curing , wide application, high bonding strength, water resistance, oil resistance, fatigue resistance.
◪ Excellent resistance to high and low temperature. It can work in the temperature range of 60-150 ℃.
Sandao Metal & plastic adhesive AB glue SD868 is widely used in solid assembly of industrial components, such as sporting goods, solar, wind, composite materials, electronics, transportation and aerospace bonding reinforcement, adhesive synthesis, assembly, packaging, filling and sealing. It is especially suitable for bonding and packaging of electronic parts. There are many formulations to connect steel, aluminum, copper with low surface energy level plastics, glass, wood, masonry and other materials.
Electroplating paint bonding
|Epoxy resin AB glue||SD868 part A||SD868 part B|
|Appearance /color||transparent||dark brown|
|Viscosity (mPa.s 25℃)||8000-12000||10000-13000|
|Specific gravity (g/ml 25℃)||1.0-1.05||1.0-1.05|
|Ratio（weight ratio pbw）||10||1|
|Gel time under normal temperature（25℃）20g||2-4h|
|Curing time|| 80℃||30mins|
|Active hydrogen equivalentg/eq||/||185/195|
|Distortion temperature HDT||80℃|
|Solume resistivity（Ω.cm）25℃||1.0~1015 |
|Surface resistivity（Ω.cm）25℃||0.9×1015 |
|Shear strength of different materials（Mpa）|
|Aluminum / copper||16-19|
Epoxy resin structural adhesive
SD868 is a high strength acrylate structural adhesive with a two component 10:1 system.
It has fast bonding and firmness. hard and tough after curing. high bonding strength and impact resistance, and good resistant to aging and solvent.
Green environmental protection
Low odor, no pollution, high strength, weakAcid and alkali resistance, impact resistance High bonding strength, water resistance
Oil resistance and fatigue resistance.
AB mixing tube
Very convenient to use, packaging specifications: specifications are 64g / support.
Put on AB glue gun and put on the thread mixing head.
The thickness of adhesive layer should be 0.05mm, the coated object should be clamped immediately, and the maximum bonding strength will be guaranteed by uniform contact pressure.
To obtain the highest mechanical strength, the surface of the material can be polished or sandblasted, and then the dust and oil stains on the surface can be scrubbed with a special solvent.
Adhesive should be put on both sides of the object and fix the splice in avoid of dislocation. Do not mix the lid of A and B to prevent contamination of the gum.
1. This product is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Packaging and preservation
Epoxy resin AB sealant is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods, should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.Company Features1.
Having been focused on innovative development, SANDAO now holds a safe lead in ab glue industry. 2.
We only hire those who people who have a sense of integrity and honesty. Our employees insist on maintaining the highest standards in ethical conduct to be responsible for our clients. 3.
Our mission is to help customers create something amazing, a product that grabs the attention of their customers. Whatever customers make, we are ready, willing and able to help them differentiate their product in the marketplace. It’s what we do for every one of our customers. Every day. Inquire online! Quality and service are always regarded as the key factors for the long-term development of SANDAO. Inquire online! We are committed to being a product solution provider for clients. No matter in the issues of products, packaging, or in transportation, we will strive to cater to customers' needs wholeheartedly. We are committed to the highest standards of excellence across all aspects of our business. We look for opportunities to exceed expectations and strive with determination to win and be the best at what we do.