SANDAO ge rtv silicone has been tested for many times. These tests have been conducted in terms of power, efficiency, service life, strength, stiffness, anti-friction, wear and tear, vibration stability, etc. 2.
The product performs more stable compared with other products in the market. 3.
Huizhou SANDAO New Material Co., Ltd sincerely hopes to create value for our customers with a more considerate and efficient service. 4.
Huizhou SANDAO New Material Co., Ltd has managed to create an inviting environment for the customers.
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.
Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.
◪ Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.
◪ Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.
◪ Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.
◪ It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.
◪ For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.
◪ Achieve actually measured high thermal conductivity: 0.8w/m.k
|Item||Condition||Part A||Part B||Mix liquid|
|Appearance||Visual||White/black Viscous liquid||Transparent / brown liquid||White/black liquid|
Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.
Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.
|Feature after curing|
|Dielectric loss tangent||25℃，1MHZ||<0.01|
|Shear temperature range||Mpa||>10|
|Operating temperature range||℃||-40~150|
Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.
Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
Plastic bottle packaging
packaging specifications: 1.25kg/ set.
Huizhou SANDAO New Material Co., Ltd is a reliable partner for ge rtv silicone. We have many years of experience in product production and overseas sales. 2.
By enhancing the technical power, SANDAO has attained many accomplishments in supplying high quality Two-component addition-type potting adhesive TDS. 3.
Currently, we are committed to getting more customers. Under this, we change the way we get along with our customers. We improve customer engagement, reassess our service solution, and developing products more targeted. In this way, we are confident to get big-name customers. In order to reduce the impact of our products on the environment, we are devoted to consistent innovation in product design, quality, reliability, and recyclability, so as to be responsible for the environment. Check it! We always pursue high-quality products. Check it! Our company always encourage employees to think outside the box to boost morale, because the company believes creativity drives business success. We often gather employees together to communicate and share their creativities or ideas on improving the products or customer service. Check it!