Such design of what is rtv silicone bestows One-component RTV silicone rubber TDS with great beauty. After curing, it can be waterproof, dampproof, and dustproof2.
This product not only helps people cut significantly on electricity bills, but also eases the burden on energy production demand. In some cases, it can achieve flame retardant, weathering, and thermal conductivity properties3.
The product has been tested for a long time and thus has a stable performance. Its curing exothermic peak is low and the curing shrinkage is small4.
The quality of this product is checked thoroughly to ensure that a defect-free product is provided. Its quality directly benefits the service life of the products that use it5.
The product has been tested to be of good performance and durability. The product has achieved the requirement of mechanical property completely
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
|Color||Colorless transparent ||white||black|
|Tensile strength (MPa)||2.0||2.0||2.0|
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
100g/tube 310ml/cartridge 2.6L/bottle
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packaging and preservation
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
As one of the best manufacturers and distributors of what is rtv silicone in China, Huizhou SANDAO New Material Co., Ltd can supply the best product for a specific application.2.
We have adapted to the demands of a growing and rapidly changing industry. We now boast a large sophisticated facility, the highest quality standards in the industry and a dynamic research and development team.3.
Huizhou SANDAO New Material Co., Ltd aims to fully introduce One-component RTV silicone rubber TDS into the international market. Welcome to visit our factory!