SANDAO what is rtv silicone is manufactured under rigorous materials inspection procedure and standardized production conditions. It is moisture-proof and shock-resistant2.
Without consideration of the SANDAO staff, One-component RTV silicone rubber TDS can not be produced to be so excellent. During its solidification process, the powder components do not delaminate3.
The product is ecologically friendly. The traditional refrigerant chemicals that will result in the erosion of the ozone layer has been totally eliminated. The product has achieved the requirement of mechanical property completely4.
The product has good wind resistance. It can withstand a certain level of wind without collapse with the help of its own gravity and base. It has superior bonding properties to metals such as copper, aluminum and stainless steel5.
The product has a remarkable shape 'memory' property. When subjected to high pressure, it can retain its original shape without deforming. It has a long-term anti-yellowing ability
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
|Color||Colorless transparent ||white||black|
|Tensile strength (MPa)||2.0||2.0||2.0|
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
100g/tube 310ml/cartridge 2.6L/bottle
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packaging and preservation
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
As is shown from the market research, One-component RTV silicone rubber TDS made by SANDAO ranks above the industry.2.
We actively promote the progress of projects in the field of environmental protection. We recycle and reuse most of the wastes and utilize the rest of the waste to generate energy, aiming to develop a cyclic economy.