Company Advantages1. SANDAO what is rtv silicone has gone through some important production stages. They cover the preparation of raw materials, parts machining, plating and anodizing, assembly, and testing. It has been widely used in electronic device manufacturing
2. Providing the most professional customer service has produced some effects on the development of SANDAO. It is a very strong impregnation product
3. The product is able to provide a great purifying effect. The multi-medium beforehand filter helps to increase the capacity of water treatment. It has a long-term anti-yellowing ability
4. With an LCD screen, the product provides more clear and bright images, which help users write more fluently and perfectly reflect the writing style. It should be fully cured before realizing its use value
5. With its components or parts soldered together, which helps improve its inner strength and stability, this product features long-lasting durability. Long application period makes it suitable for large-volume automatic production line operations
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.
The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.
Microwave oven adhesive seal
Radiator filling and bonding
Refrigerator bonding seal
Semiconductor material bonding
Thyristor filling and bonding
Type | SD916 | SD9201 | SD920 |
Color | white | white | white |
Viscosity(cp) | paste | paste | semi-fluid |
Density(g/cm3) | 2.0~2.5 | 2.0~2.5 | 3.0~3.5 |
Tack-free time(25℃,min) | ≤30 | ≤30 | ≤30 |
Tensile strength (MPa) | ≥2.5 | ≥2.5 | ≥2.5 |
Elongation(%) | ≥100 | ≥100 | ≥100 |
Shear strength(MPa) | ≥1.5 | ≥1.5 | ≥1.5 |
Hardness (shore A) | 50~65 | 50~65 | 50~65 |
Temperature range(℃) | -60~280 | -60~280 | -60~280 |
Dielectric intesity(kV/mm) | ≥18 | ≥18 | ≥18 |
Permittivity(@60Hz) | 2.8 | 2.8 | 2.8 |
Volume Resistance(Ω.cm) | 1×1015 | 1×1015 | 1×1015 |
Thermal conductivity(w/(m.k)) | 1.2 | 0.8 | 2.0 |
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
Eco-environmental protection
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
White paste
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle
Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.
Notes:
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Company Features1. With its successful marketing strategies, Huizhou SANDAO New Material Co., Ltd is winning more market shares both at home and abroad in the industry of what is rtv silicone. The strict inspection of each process of producing One-component RTV silicone rubber TDS shows the technical strength of SANDAO.
2. We have professional QC team to guarantee rtv silicone rubber 's quality.
3. Without the support of QC team in SANDAO, it is hard to say the quality of One-component RTV silicone rubber TDS can be assured. For the benefit of SANDAO and its customers, Huizhou SANDAO New Material Co., Ltd shall act decisively in One-component RTV silicone rubber TDS field. Get price!