Company Advantages1. SANDAO rtv silicone rubber has to go through the following basic steps: 3D model designing, 3D wax printing, casting the wax model into metal, and basic assembly. After curing, it can withstand torque without breaking
2. People will not require not any assistance of an expert when they want to install or know how to use this product. It is resistant to high temperature and low-temperature alternation
3. The accurate inspection process guarantees that the product meets with the international quality standards.
4. Through optimizing design, the actual application shows that rtv silicone rubber has low cost and a long service life. It is moisture-proof and shock-resistant
5. rtv silicone rubber has better performance than any other similar products and is well accepted by customers. Without any halogen, it is healthy and environmentally friendly
Economical heat conductive silicone grease SD3801
Economical heat conductive silicone grease SD3801 is one component with medium thermal conductivity, which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Heat conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially high power LED heat dissipation or coating, to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
Performance | Test data |
Appearance | White paste |
Penetration degree(1/10mm,25℃) | 260~340 |
Specific gravity (g/cm3) | 2.8-3.2 |
Bleed (%。150℃,8h) | ≤3.0 |
Fugitive constituent(%。150℃,8h) | ≤2.0 |
Break down strength(kv/mm) | ≥5.0 |
volume resistivity(Ω.cm) | 4×1014 |
Thermal conductivity(w/m·k) | ≥0.8 |
Economical heat conducting silicone grease
D3801 economical heat conduction silicone grease adopts imported organic silicon as the main body of single component organic silicon medium heat conduction silicone grease.
Eco-environmental protection
Non-toxic, non-corrosive, odorless, non drying, insolublilization, low consistency.
White paste
Excellent thermal conductivity, good electrical insulativity, wide operating temperature (operating temperature -50 ° C ~ +200 ° C), good stability.
Iron bottle packaging
packaging specifications: 1.0kg /can
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
Caution
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
bg
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
Company Features1. Huizhou SANDAO New Material Co., Ltd has strong strength in the international rtv silicone market.
2. From raw materials selection to production process and then to quality test, our rtv silicone rubber is produced strictly following the quality system certification.
3. Sustainability is essential to our business operation. We achieve this by limiting waste and using resources efficiently and providing sustainable products and solutions.