SANDAO what is rtv silicone has passed the necessary tests required by the industry. These tests are slip resistance testing, structural stability testing, tear strength testing, and thermal comfort testing. It has a wide range of properties that include chemical resistance2.
The product is highly recommended by our customers as it has high commercial value. Its quality directly benefits the service life of the products that use it3.
The product is built to last. It does not prone to have fatigue failure even it goes through a number of repeated loading and unloading cycles. It is a very strong impregnation product4.
Resistance to fatigue is one of the most critical mechanical properties of the product. It has the ability to withstand cyclic fatigue loads. Long application period makes it suitable for large-volume automatic production line operations
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
|Color||Colorless transparent ||white||black|
|Tensile strength (MPa)||2.0||2.0||2.0|
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
100g/tube 310ml/cartridge 2.6L/bottle
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packaging and preservation
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Huizhou SANDAO New Material Co., Ltd is a global supplier of the highest quality what is rtv silicone. We have the experience and product knowledge to tackle any project.2.
The professional R&D foundation has helped Huizhou SANDAO New Material Co., Ltd make great progress in the development of One-component RTV silicone rubber TDS.3.
To establish the service theory of rtv silicone is the base of Huizhou SANDAO New Material Co., Ltd's work. Contact!