The tests for SANDAO what is rtv silicone are strictly conducted. It has been tested in terms of mechanical components safety, the whole machine safety, operation safety, and environmental safety. It is an indispensable important insulating material for the electronics industry2.
Huizhou SANDAO New Material Co., Ltd will better play the advantages and provide customers with a full range of One-component RTV silicone rubber TDS services. It does not cause any corrosion to the material3.
The product has very high ratings when it comes to CRI. Its light is close to the daylight's value, reflecting colors truly and naturally. It is resistant to high temperature and low-temperature alternation
Economical heat conductive silicone grease SD3801
Economical heat conductive silicone grease SD3801 is one component with medium thermal conductivity, which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Heat conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially high power LED heat dissipation or coating, to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
|Performance ||Test data|
|Specific gravity （g/cm3）||2.8-3.2|
| Break down strength（kv/mm）||≥5.0|
Economical heat conducting silicone grease
D3801 economical heat conduction silicone grease adopts imported organic silicon as the main body of single component organic silicon medium heat conduction silicone grease.
Non-toxic, non-corrosive, odorless, non drying, insolublilization, low consistency.
Excellent thermal conductivity, good electrical insulativity, wide operating temperature (operating temperature -50 ° C ~ +200 ° C), good stability.
Iron bottle packaging
packaging specifications: 1.0kg /can
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
SANDAO is great at its own developed technology.2.
We strive to bring the following primary benefits to our business partners: the achievement of cost reduction goals and green initiative development.