Related Products
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
Ceramic bonding
Glass bonding
Metal bonding
| Type | SD906T | SD906W | SD906B |
| Color | Colorless transparent | white | black |
| Viscosity（cp） | paste | paste | paste |
| Density（g/cm3） | 1.03 | 1.33 | 1.33 |
| Tack-free time（25℃，min） | ≤20 | ≤20 | ≤20 |
| Tensile strength (MPa) | 2.0 | 2.0 | 2.0 |
| Elongation（%） | 300～400 | 300～400 | 300～400 |
| Shear strength（MPa） | 1.5 | 1.5 | 1.5 |
| Hardness(shore A) | 25～35 | 30～45 | 30～45 |
| Temperature range（℃） | -60～280 | -60～280 | -60～280 |
| Dielectric strength（kV/mm） | 18 | 18 | 18 |
| Dielectric constant（@60Hz） | 2.8 | 2.8 | 2.8 |
| Volume Resistance（Ω.cm） | 2×1016 | 2×1016 | 2×1016 |
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
Notes:
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Copyright © 2019 Huizhou Sandao New material Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
