Company Advantages1. Many of Two-component addition-type potting adhesive TDS come from world-class designers.Its quality directly benefits the service life of the products that use it
2. Our strict QC and management system can ensure high quality of Two-component addition-type potting adhesive TDS. During its solidification process, the powder components do not delaminate
3. The product is sturdy and durable. Made of high-quality materials, it is not easy to damage or deform when used in rigorous conditions. It is an indispensable important insulating material for the electronics industry
4. This product can retain its original shape. Its fabric has been tightly woven with a firm structure that is not prone to damage from the outside elements. It is corona-resistant and has good resistance to electric leakage
5. This product has a durable surface. Protection against dirt, dust and UV rays is achieved through applying high-quality finishes. After curing, it can be waterproof, dampproof, and dustproof
Sandao Two-component flame-retardant heat-conductive potting adhesiveSD6105
Sandao Two-component flame-retardant heat-conductive potting adhesiveSD6105 is suitable for long-term protection of sensitive circuits or electronic components, with stable dielectric insulation, the elastomer formed after curing is in a large range of temperature and humidity; Eliminating stresses from shocks and vibrations. It can maintain the original physical and electrical properties under various working conditions. This item has good chemical stability, easy to clean and remove after filling. in order to repair the electronic components. Excellent temperature resistance, can be used at-50 ℃ for a long period of time, fully in accordance with the European Union ROHS, can pass through the UL94-V0 fire-proof class.
SD6105 is used for sealing and potting of LED Street Light driving Power supply, LED spot light Power supply Module, Electroplating Power supply, Power Rectifier, Transformer, Generator PCB, oven and other High heating and fire prevention products, as well as large Power Electronic components, Coating protection of electronic modules and circuit boards which with high requirements for heat resistance and heat dissipation.
LED spotlight power module
LED street light drive power supply
Item | 6105 | 6105 | 6105 |
Before curing | Part A | appearance | black | white | gray |
viscosity(cps) | 3500~5500 | 3500~5500 | 3500~5500 |
relative density(g/cm³) | 1.10~1.15 | 1.10~1.15 | 1.10~1.15 |
Part B | appearance | White liquid | White liquid | White liquid |
viscosity(cps) | 3500~5500 | 3500~5500 | 3500~5500 |
relative density(g/cm³) | 1.10~1.15 | 1.10~1.15 | 1.10~1.15 |
A:B(ratio) | 1:1 | 1:1 | 1:1 |
Curing type | bi-component additive type | bi-component additive type | bi-component additive type |
Viscosity after mix(cps) | 3500~5500 | 3000~5500 | 3000~5500 |
Operate time(min) | 55~80 | 55~80 | 55~80 |
Curing time(min 25℃) | 480 | 480 | 480 |
Curing time(min 80℃) | 20 | 20 | 20 |
After curing | hardness(ShoreA,24hr) | 40~55 | 40~55 | 40~55 |
tensile strength (Mpa) | <1.50 | <1.50 | <1.50 |
shear strength (Mpa) | 2.00 | 2.00 | 2.00 |
Linear Shrinkage(%) | 0.3 | 0.3 | 0.3 |
temperature range(℃) | -60~260 | -60~260 | -60~260 |
volume resistivity(Ω·m³) | 1.0×1016 | 1.0×1016 | 1.0×1016 |
dielectric strength (KV/·㎜) | ≥27 | ≥27 | ≥27 |
dielectric constant(1.2MHz) | 3.2 | 3.2 | 3.2 |
Leakage resistance index(V) | 600 | 600 | 600 |
thermal conductivity [W/(m·K)] | 0.80 | 0.80 | 0.80 |
inflaming retarding property | UL94-V0 | UL94-V0 | UL94-V0 |
Mark: The above properties were measured at room temperature.
Thermally conductive flame retardant potting sealant
SD6105 is a two component 1:1 cross-linking by reaction, gray, solidified into a high performance elastomer.
Gray solid
It has stable dielectric insulation properties, temperature resistance, good chemical stability, and easy to clean and remove after potting.
Eco-environmental protection
Non-corrosion, non-pollution and EU RoHS standard with flame resistance UL94-V0
Plastic barrel seal
packaging, protective glue, 10kg /set (component A/ 5kg .component B/5kg), shelf life of 12 months.
Caution
1. Weighting: Accurate weighing the part A and part B. (stir A and stir B separately before weighting, Evenly redistribute slightly subsided fillers into glue.)
2. Mix glue: B component is added to A component and mixed evenly;
3. Remove air bubbles: The evenly mixed rubber material is placed in the vacuum cabinet to remove foaming;
4. Pouring: After air bubbles removed, pouring the glue into the parts and components for potting; (the surface of the parts and the mixing container before pouring should be clean and dry, do not contact with the compounds such as N、P、S、Sn、Pb、Hg、As, so as not to affect the solidification.
5. Curing: solidification of a potting part at room temperature or heated.
Packaging and preservation
bg
10kg/ set (5kg component A plus 5kg component B), this product is nontoxic, non-dangerous goods, transported according to general chemicals, stored in a cool (room temperature) dry place, shelf life last for 12 months.
Company Features1. [SANDAO is currently making great accomplishments in the Two-component addition-type potting adhesive TDS field. Our company has expert teams. They have the expertise to always make the right decision, retain control, manage risk and guarantee customers consistently high quality products.
2. Our manufacturing plant is located in the mainland, China. It enjoys advantageous transportation to provides easy access to international sea and airports. This will significantly support us to deliver quality products within a short time.
3. Our factory holds a wide range of advanced production facilities. These facilities are mainly introduced from the United States, Japan, and Germany and robust enough to ensure the smooth progress of our production plan. Huizhou SANDAO New Material Co., Ltd has been endeavoring to ensure the quality of the service. Please contact.