Company Advantages1. The design rolled out in Thermal conductive material TDS are really practical.
2. Thermal conductive material TDS enjoy the advantages of gas resistant rtv.
3. Thermal conductive material TDS can stand all kinds of strict tests before putting into use.
4. SANDAO has enough storage capacity to offer mass production of Thermal conductive material TDS.
5. By years of accumulation, SANDAO has established perfect quality assurance and managing system to assure Thermal conductive material TDS's quality.
High temperature resistant heat conductive silicone grease SD920
High temperature resistant heat conductive silicone grease SD920 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
Performance | Test data |
Appearance | Gray paste |
Penetration degree(1/10mm,25℃) | 280~340 |
Specific gravity(g/cm3) | 2.6-3.0 |
Bleed(%。150℃,8h) | ≤2.0 |
Fugitive constituent(%。150℃,8h) | ≤2.0 |
Break down strength(kv/mm) | ≥2.0 |
Volume resistivity(Ω.cm) | 4×1014 |
Thermal conductivity(w/m·k) | ≥2.0 |
General purpose thermal grease
SD920 general-purpose thermal grease uses imported silicone-based one-component silicone thermal grease.
Green environmental protection
Non-toxic, non-corrosive, odorless, non-drying, insolubilization, low consistency.
Gray paste
Excellent thermal conductivity, non curing, high temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulativity.
Iron bottle packaging
packaging specifications: 1.0kg / can.
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
Caution
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
bg
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
Company Features1. Huizhou SANDAO New Material Co., Ltd is an excellent manufacturer integrating development, design, production, and sales of gas resistant rtv. We are a well-known brand in this industry in China.
2. Huizhou SANDAO New Material Co., Ltd always adheres to independent innovation on Thermal conductive material TDS.
3. Aware of the importance of environmental sustainability, we built our own water treatment facilities based on the ecological goal of preventing contamination of our local environment, safely treating all of our effluents. We firmly believe that high-quality and professional service will eventually pay off Get quote!. We have our own environmental goals and policies. We avoid producing waste during production and use biodegradable packaging materials which do no harm to the environment. Get quote! Undertaking sustainable development plans becomes vital in our business growth. From one aspect, we handle all kinds of waste strictly in line with regulations and standards; from another, we try best to cut energy consumption and reduce energy waste during the production processes.