SANDAO gas resistant rtv is produced under the support of high tech. Comprehensive technical support system for solar power generation is adopted to adjust the energy conversion capacity. It has a long-term anti-yellowing ability2.
This product is sold to many countries and district. After curing, it can withstand torque without breaking3.
The product has been tested for many times under the rigorous quality control system. It does not cause any corrosion to the material4.
Its quality competitiveness index has kept stabilized over the years. Water absorption and coefficient of linear expansion of this product are small5.
Evaluated by domestic experts, its performance has achieved the international advanced level. It is corona-resistant and has good resistance to electric leakage
High temperature resistant heat conductive silicone grease SD920
High temperature resistant heat conductive silicone grease SD920 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
|Break down strength（kv/mm）||≥2.0|
General purpose thermal grease
SD920 general-purpose thermal grease uses imported silicone-based one-component silicone thermal grease.
Green environmental protection
Non-toxic, non-corrosive, odorless, non-drying, insolubilization, low consistency.
Excellent thermal conductivity, non curing, high temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulativity.
Iron bottle packaging
packaging specifications: 1.0kg / can.
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
SANDAO is professional in integrating production, sales and service of Thermal conductive material TDS together. Our factory is located in a predominant place. This grants us fantastic transport links that enable us to cover the whole of China and more.2.
Strengthing R&D capability is what we have been pursuing for years. We strengthen independent innovation, actively push structural adjustment, and promote competitive ability in the future.3.
Our factory has state-of-the-art manufacturing facilities. They allow us to be capable of meeting the challenges of technology, quality conformance, and delivery while ensuring cost competitiveness. Huizhou SANDAO New Material Co., Ltd will seize the opportunity to continue the rapid and healthy development of itself in Thermal conductive material TDS industry. Inquire online!