SANDAO best epoxy glue is developed after years of research from our R&D team. They use quality components to improve the illuminating performance of this product. The product has good aging resistance2.
Our epoxy resin enjoys more advantages especially in its quality. It has been widely used in electronic device manufacturing3.
The product is of high quality. Not only its raw materials are ultra-high purity without no unnecessary impurities, but also its workmanship is done by advanced techniques. It has superior bonding properties to metals such as copper, aluminum and stainless steel4.
The product is treated to be skin-friendly. Those barely visible microfibres which contain some synthetic chemical substances are treated to be harmless. Its curing exothermic peak is low and the curing shrinkage is small5.
The product is compatible with a variety of writing styles including continuous strokes, cursive scripts, and word-for-word writing. The product features good extrusion properties
Epoxy resin AB adhesive SD811
Epoxy resin AB adhesive SD811 is a two-component high-temperature resistant adhesive based on epoxy resin. It has high strength, weak acid-base resistance, impact resistance, low smell, resistance to most chemical media, extreme temperature and excellent electrical insulation characteristics. Mainly suitable for high temperature resistant metal, ceramic, etc.
◪ Fast curing, wide range of application, high bonding strength, water resistance, oil resistance, fatigue resistance.
◪ Excellent resistance to high and low temperature, can work in the temperature range of 60-150 ℃.
Sandao Epoxy resin AB adhesive are used for bonding of metal, ceramic, glass, electroplating / paint / magnetic materials, such as aircraft motor, automobile, machinery, ship, electronics, electrical apparatus, instrument, building, furniture, toys,. high temperature resistant parts such as railway vehicles ,etc, AB glue can also be used to adhesive water tank, oil road, carburetor, cylinder cover, exhaust pipe, bushing of driving shaft, plastic parts such as baffle, vehicles lamp glass, car handle, etc.
Electroplating paint bonding
Mechanical component bonding
|Epoxy resin AB glue||SD811 part A||SD811 part B|
|Viscosity (mPa.s 25℃)||8000-12000||10000-13000|
|Specific gravity (g/ml 25℃)||1.0-1.05||1.0-1.05|
|Ratio（weight ratio pbw）||1||1|
|Gel time under normal temperature（25℃）20g||45-60mins|
|Curing time|| 80℃||30mins|
|Active hydrogen equivalentg/eq||/||185/195|
|Distortion temperature HDT||80℃|
|Solume resistivity（Ω.cm）25℃||1.0~1015 |
|Surface resistivity（Ω.cm）25℃||0.9×1015 |
|Shear strength of different materials（Mpa）|
|Aluminum / copper||16-19|
Transparent epoxy resin AB glue
SD811 Epoxy AB Adhesive is an epoxy resin two component high Temperature adhesive.
Fast curing speed, wide application range, extreme temperature and excellent electrical insulation characteristics.
Green environmental protection
odorless, non-pollution, high strength, weak acid and alkali resistance, impact resistance, high adhesion strength, water resistance, oil resistance, fatigue resistance.
AB mixing tube
packaging specifications: 64g / tube.
Put on AB glue gun and put on the thread mixing head.
The thickness of adhesive layer should be 0.05mm, the coated object should be clamped immediately, and the maximum bonding strength will be guaranteed by uniform contact pressure.
To obtain the highest mechanical strength, the surface of the material can be polished or sandblasted, and then the dust and oil stains on the surface can be scrubbed with a special solvent.
Adhesive should be put on both sides of the object and fix the splice in avoid of dislocation. Do not mix the lid of A and B to prevent contamination of the adhesive.
1. Epoxy resin AB glue is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Packaging and preservation
Epoxy resin AB sealant is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods, should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.Company Features1.
Huizhou SANDAO New Material Co., Ltd has built its reputation for manufacturing high quality best epoxy glue , becoming one of the global manufacturers. With the help of technicians, SANDAO can produce technically great epoxy resin .2.
SANDAO has been excelled in its technology.3.
SANDAO New Material provides the latest technology to exceed customer and business needs. We will provide you with professional services together with epoxy ab glue . Inquire online!