effective One-component RTV silicone rubber TDS component wholesale for power module

our product

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-1

Thermal conductive silica gel SD916

Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.

Application

The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-2

Microwave oven adhesive seal

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-3

Radiator filling and bonding

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-4

Refrigerator bonding seal

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-5

Semiconductor material bonding

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-6

Thyristor filling and bonding

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-7

CPU bonding

product Performance

Type	SD916	SD9201	SD920
Color	white	white	white
Viscosity（cp）	paste	paste	semi-fluid
Density（g/cm3）	2.0～2.5	2.0～2.5	3.0～3.5
Tack-free time（25℃，min）	≤30	≤30	≤30
Tensile strength (MPa)	≥2.5	≥2.5	≥2.5
Elongation（%）	≥100	≥100	≥100
Shear strength（MPa）	≥1.5	≥1.5	≥1.5
Hardness (shore A)	50～65	50～65	50～65
Temperature range（℃）	-60～280	-60～280	-60～280
Dielectric intesity（kV/mm）	≥18	≥18	≥18
Permittivity（@60Hz）	2.8	2.8	2.8
Volume Resistance（Ω.cm）	1×10¹⁵	1×10¹⁵	1×10¹⁵
Thermal conductivity（w/(m.k)）	1.2	0.8	2.0

Product details

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-8

Thermal conductivity paste

SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-9

Eco-environmental protection

Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-10

White paste

After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.

SANDAO component One-component RTV silicone rubber TDS wholesale for power module-11

Metal hose packaging

Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle

Use instructions

Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.

Notes:

1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Company Features
1. SANDAO takes the leading position in One-component RTV silicone rubber TDS industry.
2. The strict inspection of each process of producing rtv silicone rubber shows the technical strength of SANDAO.
3. Our company truly maximize our green efforts. We use the most energy efficient machines and appliances available, from manufacturing machines through office refrigerators. All is for achieving a high level of energy efficiency. Contact! We target to become a strong leader in this industry. From now on, we will strive to improve and reposition our products, and continually introduce brand new products that most suitable for customers. We take actions to deliver environmental, social and commercial benefits. We create joint sustainability initiatives by identifying and building partnerships with our customers, suppliers and the communities in which we operate. We are working hard to create leadership for environmental sustainability. We believe that our company in combination with a well-integrated corporate sustainability strategy can help tackle a range of global challenges. This is how we work with technological advancement to continue to be a responsible and relevant driver of positive change in society. Contact!

q******r

The company has been operating in good faith for many years. It not only has advanced production and quality inspection equipment, but also has established a set of scientific and perfect quality management system. It checks every link in product development, production and sales to ensure that it is put into the market [10335 ] are high-quality qualified products.

i******u

Huizhou SANDAO New Material Co., Ltd Through strict selection and supervision of raw material supply channels, the source is well controlled, and then One-component RTV silicone rubber TDS is produced and processed relying on its own advanced equipment, mature technology and technology, and strict procedures and processes are carried out for each step Control, control the core of production, and finally conduct a detailed inspection of each finished product in accordance with the relevant international quality standard system to ensure that every product produced is a top-quality product with excellent quality .

q******i

what is rtv silicone In the whole production process, there are personnel to inspect, not only that, Huizhou SANDAO New Material Co., Ltd also has a testing department, which conducts re-inspection of various performance indicators before what is rtv silicone leaves the factory to ensure that what is rtv silicone meets the needs and expectations of customers.

c******m

The company attaches great importance to product quality and strives for excellence in all aspects of production. The rtv silicone rubber produced are exquisite in workmanship, excellent in quality and strong in practicability.

v******t

For many years, the company has always adhered to the production concept of "real materials, exquisite workmanship", and strictly controls the quality of every important production link from the selection of raw materials to the delivery of finished products to ensure that the One-component RTV silicone rubber TDS produced are all qualified products that meet national standards. .

x******w

Stability is one of its advantages. It does not tend to break down or be damaged by emergencies, such as instantaneous change of current or sudden power failure.

Product Message

*Name

Phone

*E-mail

*Content

SANDAO component One-component RTV silicone rubber TDS wholesale for power module