The production process of SANDAO rtv silicone rubber has been greatly improved, from the bulb fabrication, lampshade surface treatment, performance testing, and assembly. 2.
The product is structurally sound. Its robust industrial strength frame makes it less susceptible to many factors such as shock and vibration. 3.
The product features an intelligent design. Any time there is a problem in the production process, it either shuts down to prevent further problems or fixes the issue internally. 4.
rtv silicone rubber is produced from design to production which are under exquisite management to ensure the quality. 5.
SANDAO is equipped with advanced technical machines to ensure the mass production of rtv silicone rubber .
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
|Color||Colorless transparent ||white||black|
|Tensile strength (MPa)||2.0||2.0||2.0|
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
100g/tube 310ml/cartridge 2.6L/bottle
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packaging and preservation
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Huizhou SANDAO New Material Co., Ltd has a lot of experiences in developing and manufacturing rtv silicone . We are reputable for having strong production capability. 2.
what is rtv silicone technology plays an important role in the production of rtv silicone rubber . 3.
Our goal is: to become the first brand of Chinese One-component RTV silicone rubber TDS industry! Get info! SANDAO may make a welcome contribution to customers' business growth. Get info! SANDAO is committed to bringing endless benefits and success to each customer throughout the life cycle. Get info! Excellence in quality of rtv silicone rubber and being professional in service are what SANDAO wishes. Get info!