best MS adhesive series antifungal supply for screws

our product

SANDAO antifungal MS adhesive series supply for screws-1

MS-SD818 General purpose sealant

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

SANDAO antifungal MS adhesive series supply for screws-2

Cabinet corner bonding

SANDAO antifungal MS adhesive series supply for screws-3

Electrical bonding

SANDAO antifungal MS adhesive series supply for screws-4

Electronic Components

SANDAO antifungal MS adhesive series supply for screws-5

kitchen

SANDAO antifungal MS adhesive series supply for screws-6

Window bonding

SANDAO antifungal MS adhesive series supply for screws-7

window gap bonding

product Performance

Type	SD818
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

SANDAO antifungal MS adhesive series supply for screws-8

MS-SD818 General purpose sealant

SANDAO antifungal MS adhesive series supply for screws-9

Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

SANDAO antifungal MS adhesive series supply for screws-10

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

SANDAO antifungal MS adhesive series supply for screws-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. We have introduced a high-efficient planning and control system. This system guarantees that production time is kept at the optimum level and thereby increasing the turnover time.
2. Our company is striving for green manufacturing. Materials are carefully chosen to reduce environmental impacts. The manufacturing methods we use allow our products to be disassembled for recycling when they reach the end of their useful life.

c******s

SANDAO MS adhesive series has a professional design. It is designed by our specialists who retain the design process internally to create an artistic look and cost-effective packaging products. Lin-Yang Plastic: Get in touch with your requirements

d******s

The quality inspections of SANDAO ms polymer adhesive cover different aspects. These inspections include thickness tolerance, flatness, thermal stability, anti-bending capability, and colorfastness. Lin-Yang Plastic brings you much more convenience with PVC film

c******a

The design of SANDAO MS adhesive series requires high accuracy and achieves the one-pipeline effect. It adopts rapid prototyping and 3D drawing or CAD rendering that support the preliminary assessment of the product and tweak. In need of heavy duty PVC tarpaulins? Give us a call

i******v

A variety of processing methods are used in SANDAO ms polymer adhesive production. There are mainly turning, drilling, cutting, grinding, CNC machining and honing. Seriously recommend Lin-Yang Plastic PVC film to you

k******x

SANDAO ms polymer adhesive is designed by talented architects or interior designers. They work hard on sorting through all the decoration options, deciding on how to blend colors, selecting materials that cater to the market trend. Are you always on the way to look for a professional PVC film supplier? Lin-Yang Plastic is ready

n******q

The product performance is reliable, durable, welcomed by users. Going Camping? Make your adventure with the right camping tent made from finest grade materials

Product Message

*Name

Phone

*E-mail

*Content

SANDAO antifungal MS adhesive series supply for screws