SANDAO  >  AI - Page Sitemap  >  SANDAO antibacterial MS adhesive series factory for fixing products
SANDAO antibacterial MS adhesive series factory for fixing products

SANDAO antibacterial MS adhesive series factory for fixing products

Model number
SD958
MOQ
1pcs
Color
yellow
Package
330ml/set
Main characteristic
high-strength elastic bonding, seal repair,water and temperature resistance, instant positioning.
Main application
concrete walls,wood panels,ceramic products,metals,stone and so on.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:

our product

bg


SANDAO antibacterial MS adhesive series factory for fixing products-1

Building adhesives-SD958 super type

MS adhesive, also known as "modified silane polyether adhesive", is based on MS Polymer polymer, the raw material system contains no solvent, zero formaldehyde, zero toluene, no isocyanate and other toxic raw materials. The release of VOC (volatile organic compounds) is almost zero, so it is known as "the greenest new generation sealant".

SD958 super adhesive is a kind of all-purpose adhesive, which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.





Application

bg



Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.  


SANDAO antibacterial MS adhesive series factory for fixing products-2

Corner bonding

SANDAO antibacterial MS adhesive series factory for fixing products-3

Electronic Components

SANDAO antibacterial MS adhesive series factory for fixing products-4

Marble bonding


SANDAO antibacterial MS adhesive series factory for fixing products-5

Metal bonding

SANDAO antibacterial MS adhesive series factory for fixing products-6

Tile bonding

SANDAO antibacterial MS adhesive series factory for fixing products-7

window gap bonding



product Performance

bg


TypeSD958
Coloryellow

Viscosity (pa.s) 10rpm

900

Initial curing time(mins)

30

100% modulus (Mpa)1.2
Elongation at break(N/mm)230
Tensile strength(MPa)1.5

Product details

bg
SANDAO antibacterial MS adhesive series factory for fixing products-8
Building adhesives-SD958 super type
SD958 super adhesive is a kind of all-purpose adhesive.
SANDAO antibacterial MS adhesive series factory for fixing products-9
Light yellow

Which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.

 


SANDAO antibacterial MS adhesive series factory for fixing products-10
Environmental protection
No solvent, environmental protection, odorlessness, instant positioning.
SANDAO antibacterial MS adhesive series factory for fixing products-11
Storage
Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

bg


The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes:

  • 1. Not suitable for: adhesion of smooth surface substrates.

  • 2. Maximum endurance curing time: 24 hours.

  • 3. Construction environment temperature: 5 ℃ ~ 40 ℃.

  • 4. The operating temperature shall not be lower than-20 ℃  or above 65 ℃.

  • 5. Store in a cool and dry place under normal temperature, storage period is 12 months.



ms polymer adhesive is well accepted by excellent material, lifelike modeling and novel design. It resists both dirt and water, thereby lowering the chance of fading or staining
SANDAO MS adhesive series effortlessly strikes the perfect balance between practicality and beauty. Its quality is accredited by third-parties such as CSA
SANDAO ms polymer adhesive is expertly crafted from reliable materials. Logo can be made through screen printing, heat transfer, or embroidery
The choice of materials for MS adhesive series is as simple as possible. Logo can be made through screen printing, heat transfer, or embroidery
As a focusing point, the design of MS adhesive series plays an important role in the uniqueness of products. It comes with additional storage options, including internal and external pockets
The product embraces modernization and folk classic design which makes this product feature uniqueness and full of cultural implication. The fabric involved comes with a 50+ UPF rating that protects the wearer from 98% of UV rays
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...