hot-sale MS adhesive series allpurpose producer for fixing products

Latest products

SD401ACyanoacrylateadhesive(superglue)

SD103Cyanoacrylateadhesive(superglue)

SD958 MS building all-purpose glue

SD858 Antibacterial and Antifungal Adhesive

Product Information
Feedback

Application Scope

SANDAO New Material's silicone adhesive is widely used in multiple industries and fields.SANDAO New Material always focuses on meeting customers' needs. We are dedicated to providing customers with comprehensive and quality solutions.

Company Advantages
1. The design of SANDAO ms polymer adhesive is meticulously conceived. It is made after taking into account six major garment characteristics including style characteristics, hand characteristics, visual characteristics, utility characteristics, and durability characteristics.
2. Strict quality control: the product is of high quality, which is a result of strict quality control in the whole process. The responsive QC team takes full charge of its quality.
3. Enough storage capacity in SANDAO can also guarantee the special order from customers.
4. Except for adopting superior material, MS adhesive series is produced on sophisticated equipment.

our product

SANDAO allpurpose MS adhesive series producer for fixing products-1

MS-SD818 General purpose sealant

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

SANDAO allpurpose MS adhesive series producer for fixing products-2

Cabinet corner bonding

SANDAO allpurpose MS adhesive series producer for fixing products-3

Electrical bonding

SANDAO allpurpose MS adhesive series producer for fixing products-4

Electronic Components

SANDAO allpurpose MS adhesive series producer for fixing products-5

kitchen

SANDAO allpurpose MS adhesive series producer for fixing products-6

Window bonding

SANDAO allpurpose MS adhesive series producer for fixing products-7

window gap bonding

product Performance

Type	SD818
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

SANDAO allpurpose MS adhesive series producer for fixing products-8

MS-SD818 General purpose sealant

SANDAO allpurpose MS adhesive series producer for fixing products-9

Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

SANDAO allpurpose MS adhesive series producer for fixing products-10

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

SANDAO allpurpose MS adhesive series producer for fixing products-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. As a reputable manufacturer of ms polymer adhesive, Huizhou SANDAO New Material Co., Ltd, in virtue of strong R&D and manufacturing abilities, has become a notable expert in this field.
2. Our modern factory runs smoothly under comprehensive safety protocols. This means that our workers are able to produce our products as efficiently and safely as possible.
3. To be one of the advanced MS adhesive series manufacturer is the hope of SANDAO. Check it! SANDAO commits to make achievements in the process of producing MS adhesive series. Check it! The aim of being a national MS adhesive series manufacturer has always been kept in SANDAO's mind. Check it! We cling to the responsibility of consistent high quality MS adhesive series. Check it!

l******s

SANDAO ms polymer adhesive is with carefully finished details and quality design that suits international tastes.

z******n

Any color and any size are available for MS adhesive series.

b******i

SANDAO ms polymer adhesive has a user-centric and product-centric design.

i******j

MS adhesive series achieves to a high level in terms of quality and safety.

s******n

The production speed of SANDAO MS adhesive series is guaranteed by advanced technology.

h******n

This product has great strength. The materials used for has the strength to resist externally applied loads without breaking or yielding.

Product Message

*Name

Phone

*E-mail

*Content

SANDAO allpurpose MS adhesive series producer for fixing products