SANDAO ms polymer adhesive is manufactured using the finest quality raw materials. 2.
The product can provide uniform and faultless results. It can complete its task normally and reach the predetermined requirements without any failure. 3.
The product has high positioning accuracy. During the workpiece fabrication, various geometric elements have been taken as datum reference to guarantee its dimension accuracy. 4.
SANDAO has been cooperating with lots of professional manufacturers in China. 5.
As a professional MS adhesive series manufacturer, the company has a strong and perfect ms polymer adhesive system and good corporate culture.
Healthy antimicrobial and anti-mildew adhesive SD858
In daily life, black mold breeding phenomenon everywhere, not only caused the pollution of the living environment, but also long-term harm to people's physical and mental health;
Sandao Healthy antimicrobial and anti-mildew adhesive D858 is a professional anti-mildew antibacterial sealant, compared with the ordinary anti-mildew gel on the market, D858’s polymer structure can more effectively inhibit the breeding of mold, the protection time is longer.
There is no formaldehyde, no toluene, no solvent, no isocyanate, no toxic and tasteless, the content of volatile organic compounds （VOC）is almost 0, the product itself is healthy and environmental protection, the mildew prevention performance is longer, more outstanding.
Multifunctional adhesives can be used for bonding, sealing and repairing cracks.
High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.
Viscosity (pa.s) 10rpm
Initial curing time（mins）
|100% modulus (Mpa)||1.2|
|Elongation at break（N/mm）||230|
SD858 Antibacterial and Antifungal Adhesive
SD858 is a professional anti-mildew and anti-bacterial sealant. The macromolecule structure can more effectively inhibit the growth of mildew, and the protection time is longer.
The polymer network structure firmly locks the antibacterial property, inhibits the growth of mold, and has a longer aging time.
Green environmental protection
Formaldehyde free, no toluene, no solvent, no isocyanate, non-toxic and tasteless
Store in a cool and dry place under normal temperature, storage period is 12 months.
The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .
1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.
With a unique vision, Huizhou SANDAO New Material Co., Ltd is a leader in providing high quality MS adhesive series and services. 2.
We have a responsible quality team. They control and verify the compliance of products with company standards and international standards through production process audits product audits and post-event audits. 3.
We have built our manufacturing sustainability strategy. We are reducing the greenhouse gas emissions, waste and water impacts of our manufacturing operations as our business grows. We believe that we can drive business results while benefiting society, and for that reason, we focus on initiatives that contribute to our profit, generate enthusiasm, and positively contribute to society. Inquire online!