loading
SANDAO  >  AI - Page Sitemap  >  SANDAO adhesive MS adhesive series producer for fixing products
SANDAO adhesive MS adhesive series producer for fixing products

SANDAO adhesive MS adhesive series producer for fixing products

Model number
SD818
MOQ
1pcs
Color
yellow
Package
330ml/set
Main characteristic
high-strength elastic bonding, seal repair,water and temperature resistance, instant positioning.
Main application
concrete walls,wood panels,ceramic products,metals,stone and so on.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Our expert's extensive knowledge of the various materials ensures the SANDAO MS adhesive series is made of the most appropriate materials. It should be fully cured before realizing its use value
2. This product has a wide range of applications on the market. During its solidification process, the powder components do not delaminate
3. The product is highly recommended by its high quality and versatility. The product has good aging resistance
4. Its comprehensive cost is much lower than that of common MS adhesive series. Without any halogen, it is healthy and environmentally friendly
5. SANDAO is known as the top manufacturer in producing the high quality product. In some cases, it can achieve flame retardant, weathering, and thermal conductivity properties

our product

bg


SANDAO adhesive MS adhesive series producer for fixing products-1

MS-SD818  General purpose sealant 

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

bg



Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.  


SANDAO adhesive MS adhesive series producer for fixing products-2

Cabinet corner bonding

SANDAO adhesive MS adhesive series producer for fixing products-3

Electrical bonding

SANDAO adhesive MS adhesive series producer for fixing products-4

Electronic Components


SANDAO adhesive MS adhesive series producer for fixing products-5

kitchen

SANDAO adhesive MS adhesive series producer for fixing products-6

Window bonding

SANDAO adhesive MS adhesive series producer for fixing products-7

window gap bonding



product Performance

bg


TypeSD818
Coloryellow

Viscosity (pa.s) 10rpm

900

Initial curing time(mins)

30

100% modulus (Mpa)1.2
Elongation at break(N/mm)230
Tensile strength(MPa)1.5

Product details

bg
SANDAO adhesive MS adhesive series producer for fixing products-8
MS-SD818  General purpose sealant
MS-SD818  General purpose sealant
SANDAO adhesive MS adhesive series producer for fixing products-9
Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

SANDAO adhesive MS adhesive series producer for fixing products-10
Environmental protection
No solvent, environmental protection, odorlessness, instant positioning.
SANDAO adhesive MS adhesive series producer for fixing products-11
Storage
Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

bg


The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes:

  • 1. Not suitable for: adhesion of smooth surface substrates.

  • 2. Maximum endurance curing time: 24 hours.

  • 3. Construction environment temperature: 5 ℃ ~ 40 ℃.

  • 4. The operating temperature shall not be lower than-20 ℃  or above 65 ℃.

  • 5. Store in a cool and dry place under normal temperature, storage period is 12 months.



Company Features
1. Huizhou SANDAO New Material Co., Ltd has rigorous research and development organization for MS adhesive series.
2. Huizhou SANDAO New Material Co., Ltd hold the business concept of ms polymer adhesive, our products won a great popularity among customers. Ask online!
We insist on using advanced concepts and exquisite craftsmanship to process MS adhesive series, so that MS adhesive series not only has a reasonable structure, but also has excellent performance, both aesthetics and practicality, high quality, and can meet customers' high requirements demand for quality products.
For many years, the company has always adhered to the production concept of "real materials, exquisite workmanship", and strictly controls the quality of every important production link from the selection of raw materials to the delivery of finished products to ensure that the MS adhesive series produced are all qualified products that meet national standards. .
MS adhesive series High-quality materials are used, combined with advanced technology for processing, so that all aspects such as quality and performance can reach national standards.
Huizhou SANDAO New Material Co., Ltd Always put product quality first, not only select high-quality raw materials and use advanced production technology to manufacture ms polymer adhesive, but also set up a professional quality inspection team to strictly monitor each production link and each production process, To ensure that the ms polymer adhesive produced are of high quality.
ms polymer adhesive They are all made of environmentally friendly and safe materials, which are produced through refined processing using advanced manufacturing technology, with beautiful appearance, reliable performance, fine workmanship and excellent quality.
Our MS adhesive series has the best performance/price ratio. The product is awarded by GS, CE, EMC, LVD, LFGB, RoHS, and REACH certifications
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...