Related Products
General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.
◪ General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.
It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.
Leather bonding
Metal bonding
Plastic bonding
Furniture bonding
Rubber bonding
Silica gel bonding
| Before curing | |
| Appearance | transparent |
| Viscosity(mPa.s) | >300 |
| density(g/c㎡) | 1.05 |
| After curing | |
| Shear strength(Mpa) | >24 |
| Temperature range（℃） | -55~85 |
| Curing time (s) | 15 |
| Maximum filling gap (mm) | 0.1 |
General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.
It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.
Using process:
1) Use a dry cloth or abrasive paper to remove surface dust, oil agent, steel embroidery, then wipe and clean with acetone or trichloroethylene.
2) Open the front cover, flick tip by finger, make no residual liquid, and then poke open by using needle.
3) Drop a little glue to the surface, adhesive immediately and keep to hardening, curing time is few seconds to few minutes; reach the practical strength within 30mins, strength, reach the highest strength within 1-2 hours;
4) After use, wipe the tip, cover the lid.
1. The vapour of this glue will hurt eyes.
2. If hand touched, wash clean by using soap, water, pumice, otherwise it can curing in hand after a while, it will recede after a few days.
3. Avoid contact of eyes and skin. Wash immediately with water and consult a doctor immediately in case of accident.
This product is packaged in plastic with 20g/ bottles or 1000g/ bottles.
The product should be stored in dry shade place (below 25 ℃).
The shelf time is 6 month.
Our advantages
1.Best quality and Competitive price & Professional service
2.Kunshan Yalong Trading Co.,Ltd,global fine & specialty chemicals suppliers
Product specifications
| Product name | 2,4,6-Trichlorophenol |
| CAS # | 88-06-2 |
| EINECS # | 201-795-9 |
| Chemical formula | C6H3OCl3 |
| Chemical weight | 197.4477 |
| Density | 1.596g/cm3 |
| Melting point | 65-68°C |
| Boiling point | 246°C at 760 mmHg |
| Flashing point | 95.9°C |
| Water solubility | 0.8 g/L |
| Steam pressure | 0.0177mmHg at 25°C |
Pls email me your inquiry and tell me you required quantity,specific data,destination port etc.
Thank you for your reference!
2,4,6-Trichlorophenol 88-06-2HUNGSUNCHEMChemical formula of oxalic acid in bulk
1) Product Name: Chemical formula of oxalic acid in bulk
2) Active ingredients: oxalic acid
3) Specification: ≥99.5%
4) Test method: TLC
5) Appearance: white crystalline powder
6) Character: Colorless monoclinic flake or prism crystals or white powder, oxidation, no smell, oxalate synthesis oxalic acid. 150 ~ 160 °C sublimation. In hot, dry air weathering. 1 g soluble in 7 ml and 2 ml water boiling water, 2.5 ml of ethanol and 1.8 ml, 100 ml boiling ethanol ether, 5.5 ml, glycerin, insoluble in benzene, chloroform and petroleum ether. 0.1 mol/L solution of the pH value of 1.3. Relative density (d18.54) 1.653. Melting point of 101 ~ 102 °C, 187 °C, no water). Low toxicity, median lethal dose (rabbit, percutaneous) 2000 mg/kg.
7) Introduction:
Oxalic acid is one of the simplest organic dibasic acid. Short form HOOCCOOH structure. It is usually colorless, transparent crystal, harmful to human body, can raise the body's ph balance, affect a child's development, play an important role in the industrial, oxalate oxalate can derusting. Oxalic acid in in nature, often in the form of oxalate found in plants such as barberry, sheep hoof grass, sorrel and sorrel grass membrane, almost all plants contain oxalic acid salt.
1. In Metallurgy industry: as precipitating and separating function for Rare-earth metal.
2. In pharmaceutical industry: used in Tetracycline, Oxytetracycline, and Borneol, etc.
3. In Light industry: polishing for Marble, rust-remover, bleaching, dirt-remover, leather-processing, wood, and aluminium products etc.
4. In Dyeing and printing industry: as reducing agent for dyeing and printing industry, as bleaching agent for textile, substitute for Acetic acid, as coloring mordant for fast pigment dyestuff.
5. In organic synthetic: used in 2133 resin, Urea-formaldehyde molding powder, Butadiene catalyst, etc.
6. In electron industry: preparation of chemicals raw material for porcelain
capacitor, preparation of electron equipment detergent.
7. In other aspects: as analysis reagent, raw material of chemicals.
Packaging Description | Sealed export grade drum & double of sealed plastic bag |
Storage | In a cool dry place and keep away from strong light and heat |
Shelf life | 2 years when properly stored |
a. Customs clearance
1) By Express:
Normally there is no specical need for the recipient to clear the customs. If the customs has an objection,our rich experienced and peofessional group will help you clear the customs.
2) By Air and by Sea:
Our company will cooperate with the recipient to provide relevant file and information in the customs clearance procedure.
b. Payment
T/T,Wester Union,MoneyGram,L/C etc.
Xi'an Sonwu Biotech Co.,Ltd.
Tel: 029-68509001/029-68509010
Fax: 86-29-68740252
Web:sonwu.en.alibaba.com/www.sonwu.com
Copyright © 2019 Huizhou Sandao New material Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
