Comprehensive tests are carried out on SANDAO what is rtv silicone. These tests help establish product compliance to standards such as ANSI/BIFMA, CGSB, GSA, ASTM, CAL TB 133 and SEFA. It has good adhesion to a variety of materials2.
The product can well suit the customer's application requirements. It does not cause any corrosion to the material3.
The product has the advantage of fire resistance. It is able to provide a barrier to the spread of fire or perform structurally when exposed to fire. It is moisture-proof and shock-resistant4.
The product features good deformation resistance. The temperature to which the metal is heated and the rate of cooling is carefully controlled to achieve the desired outcome. Its viscosity differs depending on the material, performance and production process5.
The product ensures safe barbequing under heat. The stainless steel materials have been tested and proved that no harmful substances will be released under high temperature during the preliminary stage. The product features good extrusion properties
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
|Color||Colorless transparent ||white||black|
|Tensile strength (MPa)||2.0||2.0||2.0|
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
100g/tube 310ml/cartridge 2.6L/bottle
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packaging and preservation
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Based in China, Huizhou SANDAO New Material Co., Ltd has exceptional R&D and manufacturing abilities. We have been consistently recognized for our products, including quality what is rtv silicone. SANDAO has excellent technology to be applied in the production of rtv silicone rubber .2.
Huizhou SANDAO New Material Co., Ltd constantly implement the research and development.3.
Continue R&D efforts are made on our One-component RTV silicone rubber TDS. Our acceptance is: rtv silicone . Inquire!