Company Advantages1. Throughout the entire production process, SANDAO rtv silicone is under rigorous scrutinization, including the quality of dyeing pigments, weaving technique, and waste treatment. Water absorption and coefficient of linear expansion of this product are small
2. Regardless of whether one looking to divide his space or expand it, he can do so with this product. It allows one to get the most out of the space. It has superior bonding properties to metals such as copper, aluminum and stainless steel
3. The main advantages of this product are stable quality and high performance. It does not cause any corrosion to the material
4. The rigorous quality checking process guarantees customers a full range of quality product. It can be cured into a thermosetting polymer insulation material with excellent properties
5. Since we have been concentrating on high quality product, this product has been ensured in terms of the quality. The product features good extrusion properties
Printed circuit board coating SD399
Printed circuit board coating SD399 is a fluid, one-component, fast-curing, non-corrosive silicone rubber adhesive sealant that cures into a silicone elastomer in air. This product complies with: MIL-A-461468 Corrosive Test Standard. Excellent electrical insulation performance against ozone and chemical attack.
The silicone adhesive is suitable for waterproofing of electronic coatings, LCD modules for potting, solar energy, automobiles, home appliances, electrical appliances, circuit boards, etc.
Electronic product bonding
Type | SD399 | SD399B | SD399W |
Color | Colorless transparent semi-fluid | Black semi-fluid | White semi-fluid |
Density(g/cm3) | 1.0~1.1 | 1.0~1.1 | 1.0~1.1 |
Tack-free time(25℃,min) | ≤40 | ≤40 | ≤40 |
Tensile strength(MPa) | ≥1.5 | ≥1.5 | ≥1.5 |
Elongation(%) | 200~300 | 200~300 | 200~300 |
Shear strength(MPa) | ≥1.0 | ≥1.0 | ≥1.0 |
Hardness(shore A) | 20~30 | 20~30 | 20~30 |
Temperature (℃) | -50~200 | -50~200 | -50~200 |
Permittivity(@60Hz) | 2.8 | 2.8 | 2.8 |
Dielectric intesity(kV/mm) | ≥20 | ≥20 | ≥20 |
Volume Resistance(Ω.cm) | 2.0×1015 | 2.0×1015 | 2.0×1015 |
SD399 circuit board coated with silicone
SD399 circuit board coating is a fluid, one-component, fast curing, non-corrosive silicone rubber adhesive sealant.
Green environmental protection
Rapid vulcanization, very low odor, release of alcohol vapor during vulcanization
Colorless transparent rogue
Excellent heat resistance and cold resistance, -50 to 200 ° C, excellent weather resistance, ozone resistance and chemical resistance, excellent electrical insulation properties
Long storage period
Store in a cool, dry place with a shelf life of six months. Packing specification: 330ML / PCS or according to customer requirements.
First, surface of the substrate is cleaned to remove rust, dust and oil.
Second the silicone adhesive sealant has a surface cure time of about 20 minutes and is fully cured after 24 hours.
Notes:
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Company Features1. As a powerful technology firm, Huizhou SANDAO New Material Co., Ltd has been enhancing the production efficiency.
2. The strong aim of SANDAO would be to function as future global rtv silicone supplier. Call now!