Home  > PRODUCT  > Silicone adhesive series  > One-component RTV silicone rubber TDS  >  One component RTV Silicone sealant SD909
One component RTV Silicone sealant SD909

One component RTV Silicone sealant SD909

Model number
SD909
MOQ
1pcs
Color
Transparent / white/black semi-fluid
Package
100ml/pcs, 310ml/pcs, 2600ml/pcs
Main characteristic
Tack-free time is only 3-10mins.
Main application
bonding and positioning of electronic components on electronic circuit board etc.
Lead time
within a week after payment

our product

bg


SD909 Flexible Silicone Sealant Series
SD909 Flexible Silicone Sealant Series is a silicone adhesive that can be quickly bonded. It is a black or colorless translucent viscous liquid with excellent insulation, good adhesion, moisture resistance, shock resistance, corona resistance and leakage resistance, excellent in flexibility.

Application

bg


The silicone sealant is used for bonding and positioning of electronic components on an electronic circuit board, and is shockproof, moisture-proof and sealed, and high-temperature adhesive seal of metal plane.

Power Adapter

Semiconductor material bonding

Ceramic bonding


Electronic circuit board

Glass bonding

Metal bonding



product Performance

bg


TypeSD909QTSD909BTSD909W
ColorColorless transparent semi-fluidBlack semi-fluidWhite semi-fluid
Density(g/cm3)1.0~1.051.0~1.051.0~1.05
Tack-free time(25℃,min)3~103~103~10
Tensile strength (MPa)≥0.8≥0.8≥0.8
Elongation (%)≥400≥400≥400
Shear strength(MPa)≥0.6≥0.6≥0.6
Hardness(shore A)8~158~158~15
Dielectric constant(@60Hz)2.82.82.8
Dielectric strength(kV/mm)≥22≥22≥22
Volume Resistance(Ω.cm)2.0×10152.0×10152.0×1015

Product details

bg
Silicone sealant
SD909 flexible silicone sealant series is a silicone adhesive that can be quickly bonded.
Eco-environmental protection
Neutral non-corrosive, odorless, Non-pollution, good viscosity and fluidity.
Colorless translucent viscous liquid.
After curing, moistureproof, shock-proof, corona-resistant,  anti-leakage,excellent  flexibile film , it has excellent resistance to cold and heat exchange (-60~260°C).
Packaging
Packing specification: 100g /tube, 310ml/cartridge 2.6L / bottle.

Use instructions

bg


  • The surface of the substrate must be degreased and dried, and corona treatment can improve the bonding effect(thickness not exceeding 6 mm).

  • The silicone adhesive sealant has a surface cure time of about 20 minutes and is fully cured after 24 hours.


Packaging and preservation

bg


Notes:
1.When the relative temperature is higher than 30%, the curing will accelerate.
2.Keep thermal paste out of reach of children.
3.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...