SANDAO rtv silicone is developed containing special Electro-Magnetic Interference Suppression Components. These components help reduce or eliminate noise caused by electromagnetism. 2.
The product features an optimum reaction temperature. The active chemicals have been chosen to allow maximum operating temperature range. 3.
The product has flexible configurations. It is equipped with a variety of peripherals that can work in a decentralized manner. 4.
This product has received many praises from customers. 5.
Thanks to its good characteristics, the product has found a wide application in the global market.
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
|Color||Colorless transparent ||white||black|
|Tensile strength (MPa)||2.0||2.0||2.0|
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
100g/tube 310ml/cartridge 2.6L/bottle
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packaging and preservation
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
SANDAO is unique in being able to quickly respond to rtv silicone , while providing quality assurance. 2.
Huizhou SANDAO New Material Co., Ltd has strong One-component RTV silicone rubber TDS design and manufacturing capabilities. Almost all its what is rtv silicone are self-designed and manufactured. 3.
SANDAO New Material adheres to the development philosophy of respecting life and development trends. Contact us! SANDAO's existence is to serve our customers. Contact us! Our common goal in Huizhou SANDAO New Material Co., Ltd is to become an influential rtv silicone supplier at home and abroad. Contact us!