SANDAO  > 

AI - Page Sitemap

 > 

One-component RTV silicone rubber TDS electronic producer for electronic products

One-component RTV silicone rubber TDS electronic producer for electronic products

One-component RTV silicone rubber TDS electronic producer for electronic products

Model number
SD906
MOQ
1pcs
Color
Transparent / white/black
Package
100g/pcs ,300ml/pcs, 2600ml/pcs.
Main characteristic
high strength, waterproof, oil proof, impact resistant.
Main application
refrigerators, microwave ovens, circuit boards, electronic components and machinery etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Quality assurance for SANDAO what is rtv silicone is a highly demanding process. The product has been tested in many ways, such as substances, colorfastness check (CF to light, ozone, water, bleach), weather resistance, antibacterial & antimicrobial performance, and so on. And it can be heat conductive, anti-corrosive, and temperature resistant after curing
2. It enjoys increasing popularity among consumers, with characteristics described with several factors, quality of design, quality of conformance, and safety. During its solidification process, the powder components do not delaminate
3. The product has stable electric performance. Its circuit boards and other electrical components are sophisticatedly soldered to guard against any external influence. Its curing exothermic peak is low and the curing shrinkage is small

our product

bg


One-component RTV silicone rubber TDS electronic producer for electronic products-1
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.

Application

bg


The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.

One-component RTV silicone rubber TDS electronic producer for electronic products-2

Microwave oven adhesive seal

One-component RTV silicone rubber TDS electronic producer for electronic products-3

Refrigerator bonding seal

One-component RTV silicone rubber TDS electronic producer for electronic products-4

Semiconductor material bonding


One-component RTV silicone rubber TDS electronic producer for electronic products-5

Ceramic bonding

One-component RTV silicone rubber TDS electronic producer for electronic products-6

Glass bonding

One-component RTV silicone rubber TDS electronic producer for electronic products-7

Metal bonding



product Performance

bg


TypeSD906TSD906WSD906B
ColorColorless  transparent  whiteblack
Viscosity(cp)pastepastepaste
Density(g/cm3)1.031.331.33
Tack-free time(25℃,min)≤20≤20≤20
Tensile strength (MPa)2.02.02.0
Elongation(%)300~400300~400300~400
Shear strength(MPa)1.51.51.5
Hardness(shore A)25~3530~4530~45
Temperature range(℃)-60~280-60~280-60~280
Dielectric strength(kV/mm)181818
Dielectric constant(@60Hz)2.82.82.8
Volume Resistance(Ω.cm)2×10162×10162×1016

Product details

bg
One-component RTV silicone rubber TDS electronic producer for electronic products-8
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
One-component RTV silicone rubber TDS electronic producer for electronic products-9
Eco-environmental protection
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
One-component RTV silicone rubber TDS electronic producer for electronic products-10
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
One-component RTV silicone rubber TDS electronic producer for electronic products-11
Packing specifictions
100g/tube 310ml/cartridge 2.6L/bottle

Use instructions

bg


  • The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).

  • The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.


Packaging and preservation

bg


Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.

Storage: stored in a cool and dry place for one year.

Notes:
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.


Company Features
1. As a major exporter of China One-component RTV silicone rubber TDS, Huizhou SANDAO New Material Co., Ltd has strong research and development capabilities. Our rtv silicone rubber is easily operated and need no additional tools.
2. The quality for our One-component RTV silicone rubber TDS is so great that you can definitely rely on.
3. Our technology is always one step ahead than other companies for One-component RTV silicone rubber TDS. Huizhou SANDAO New Material Co., Ltd wishes our One-component RTV silicone rubber TDS benefits every customer. Inquire now!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...