One-component RTV silicone rubber TDS certifications for diode

Product Information of One-component RTV silicone rubber TDS certifications for diode

Company Advantages
1. Huizhou SANDAO New Material Co., Ltd adopts appropriate material to align with functions of One-component RTV silicone rubber TDS. Long application period makes it suitable for large-volume automatic production line operations
2. The product plays an important role and has been deeply trusted by our customers. Strong weather resistance makes attribute to its long service life
3. This product has the desired breathability. Its fabric used showcases outstanding abilities with regard to air permeability, water vapor permeability, and water vapor resistance. It has been widely used in electronic device manufacturing
4. This product is strongly resistant to moisture. It will not be affected by water which will provide fertile grounds for germs and molds. After curing, it can withstand torque without breaking
5. This product features excellent cushioning. Its materials used are both soft and flexible enough to absorb any form of impact from the feet. It is resistant to high temperature and low-temperature alternation

our product

One-component RTV silicone rubber TDS certifications for diode-1

Silicone adhesive sealant SD906

Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.

Application

The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.

One-component RTV silicone rubber TDS certifications for diode-2

Microwave oven adhesive seal

One-component RTV silicone rubber TDS certifications for diode-3

Refrigerator bonding seal

One-component RTV silicone rubber TDS certifications for diode-4

Semiconductor material bonding

One-component RTV silicone rubber TDS certifications for diode-5

Ceramic bonding

One-component RTV silicone rubber TDS certifications for diode-6

Glass bonding

One-component RTV silicone rubber TDS certifications for diode-7

Metal bonding

product Performance

Type	SD906T	SD906W	SD906B
Color	Colorless transparent	white	black
Viscosity（cp）	paste	paste	paste
Density（g/cm3）	1.03	1.33	1.33
Tack-free time（25℃，min）	≤20	≤20	≤20
Tensile strength (MPa)	2.0	2.0	2.0
Elongation（%）	300～400	300～400	300～400
Shear strength（MPa）	1.5	1.5	1.5
Hardness(shore A)	25～35	30～45	30～45
Temperature range（℃）	-60～280	-60～280	-60～280
Dielectric strength（kV/mm）	18	18	18
Dielectric constant（@60Hz）	2.8	2.8	2.8
Volume Resistance（Ω.cm）	2×10¹⁶	2×10¹⁶	2×10¹⁶

Product details

One-component RTV silicone rubber

SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber

Eco-environmental protection

Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.

One-component RTV silicone rubber TDS certifications for diode-10

Milky white paste

After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.

One-component RTV silicone rubber TDS certifications for diode-11

Packing specifictions

100g/tube 310ml/cartridge 2.6L/bottle

Use instructions

The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.

Packaging and preservation

Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.

Storage: stored in a cool and dry place for one year.

Notes:
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Company Features
1. Huizhou SANDAO New Material Co., Ltd is a professional one-stop what is rtv silicone manufacturing company based in China. We mainly focus on R&D, producing, and marketing. Our factory firmly adheres to the up-to-date quality control system and strict production management to fulfill the quality commitment to customers.
2. The factory is located in a place proximal to clients or vendors. The position advantage has significantly reduced travel or shipping expenses and enabled us to provide faster customer service.
3. We have a skilled highly engaged production management team. They often hold a responsible attitude throughout our operations, no matter in inspecting product quality or controlling the production process. We will keep providing customers with high quality One-component RTV silicone rubber TDS. Get an offer!

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

Five important factors affecting thermal conductivity of silicone grease

1. Types and characteristics of polymer matrix materials The higher thermal conductivity of matrix materials, the better the dispersion of filler in matrix, the better the combination of matrix and filler, and the better thermal conductivity of thermal composites.2. Type of filler The higher thermal conductivity of the filler, the better thermal conductivity of the composites.3. Shape of filler the sequence of thermal conduction pathways are fibrous , flake and granular, the easier the filler is to form thermal conduction pathways, the better thermal conductivity.4. Content of fillerThe distribution of filler in polymer determines the thermal conductivity of composite. When the content of filler is small, the effect of heat conduction is not obvious. When there is too much filler, the mechanical properties of the composites will be greatly affected. When the content of the filler increases to a certain value, the interaction between the filler forms a network or chain chain in the system. When the direction of the chain is consistent with the direction of heat flow, the thermal conductivity is best. Therefore, there is a critical value of the quantity of heat conducting filler.5. Bonding characteristics of filler and matrix material interface .The higher the degree of binding between the filler and matrix, the better the thermal conductivity. The suitable coupling agent is used for surface treatment of the filler, and the thermal conductivity can be increased by 10%-20%.

How to remove organic silica gel ?

First,it’s very easy to remove and clean when the silicone rubber uncured. No matter it’s in human body, utensils or clothing,just wash it by water. Second,it’s very difficult to remove organic silica gel after curing, If solidified gel is cohere to glass, ceramics, metals and so on, you can clean it with solvents such as xylene and acetone. If you don't know these two kinds of substances. Banana water can be considered, because banana water contains these two kinds of substances, If there is less organic glue attached to objects such as glass, you can also try scraping it off with a scraper. If cohere to cloth, try to use brush, if not ok, choose banana water. Third, it is easy to deal with if silicone rubber cohere on hands. Organic silicone will not stick to the hand after cured, so we can remove it by rub hands.

Solution to bubbles in epoxy resin potting compound

During the filling process, the problem of bubbles in the capacitor after filling is often encountered, which may be due to the following reasons:1. Bubbles come when mixing and pottingIt is very easy to bring air into the glue because of the large viscosity of glue or wrong stirring. If the viscosity of glue is large, the bubble is difficult to eliminate. If the glue viscosity is small, the glue solidifies slowly, the bubble will slowly float to the surface to eliminate automatically. In order to eliminate the bubbles in the process of glue filling, the bubbles can be eliminated by vacuuming, heating to reduce viscosity, adding diluent to reduce viscosity or adding defoamer. Pls choose the best way for yourself. 2. Bubbles come during curingThere are also several reasons for the formation of bubbles in the curing process: the curing speed is too fast, the exothermic temperature is high, the shrinkage of the glue is large, too much plasticizer and solvent in the glue.these are easy to produce bubbles in the curing process. Epoxy resin sealant is widely used in electronic products such as transformers, capacitors and so on. Its main functions are moisture-proof, water-proof, oil-proof and dust-proof. It also has excellent resistance to moisture, heat and aging. By virtue of these advantages, it occupies a considerable advantage in the field of electronic encapsulation.

High heat conductively grease features

As heat conducting material, silica gel can quickly absorb heat and give off heat.The higher the thermal conductivity of the silicone is, the more effective it is in transmitting heat from your processor to the radiator.Thus reducing the technical difference between the radiators and the radiating structure components which requires the effect of shock absorption, installation, testing, and the convenience of repeated use.