SANDAO rtv silicone is manufactured under the guidance of our experienced professionals, using advanced machines and tools in tandem with international quality standards. 2.
This product has passed the formal certification of industry quality standard. 3.
The product helps to boost people's confidence, enhance their beauty and showcase that special beauty to get compliments from others.
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
|Color||Colorless transparent ||white||black|
|Tensile strength (MPa)||2.0||2.0||2.0|
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
100g/tube 310ml/cartridge 2.6L/bottle
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packaging and preservation
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
As a One-component RTV silicone rubber TDS manufacturer, Huizhou SANDAO New Material Co., Ltd wants to go out of Asia and go global. 2.
Huizhou SANDAO New Material Co., Ltd owns internationally leading manufacturing equipment for rtv silicone rubber . 3.
The task of SANDAO is to optimize rtv silicone and establish what is rtv silicone. Please contact us! Huizhou SANDAO New Material Co., Ltd will provide our customers with best service. Please contact us! Huizhou SANDAO New Material Co., Ltd offers best quality for One-component RTV silicone rubber TDS with best service. Please contact us! Our technician will make a professional solution and show you how to operate step by step for our One-component RTV silicone rubber TDS. Please contact us!