SANDAO  >  AI - Page Sitemap  >  newly rtv silicone rubber economical  manufacturer for screws
newly rtv silicone rubber economical  manufacturer for screws

newly rtv silicone rubber economical  manufacturer for screws
  • newly rtv silicone rubber economical  manufacturer for screws
  • newly rtv silicone rubber economical  manufacturer for screws
  • newly rtv silicone rubber economical  manufacturer for screws
  • newly rtv silicone rubber economical  manufacturer for screws
  • newly rtv silicone rubber economical  manufacturer for screws
  • newly rtv silicone rubber economical  manufacturer for screws
  • newly rtv silicone rubber economical  manufacturer for screws
  • newly rtv silicone rubber economical  manufacturer for screws

newly rtv silicone rubber economical  manufacturer for screws

The R&D and design of SANDAO rtv silicone involve not only POS system software but the hardware components. The team is dedicated to integrating POS software into hardware seamlessly.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Closely following the market trend, SANDAO New Material uses advanced production equipment and manufacturing technology to produce silicone rubber. The product receives favors from the majority of customers for the high quality and favorable price.silicone rubber in SANDAO New Material has the following advantages, compared with same kind of products in the market.
  • v s
Company Advantages
1. The R&D and design of SANDAO rtv silicone involve not only POS system software but the hardware components. The team is dedicated to integrating POS software into hardware seamlessly.
2. The product is of high quality and reliable performance.
3. The high quality of the product has been approved by many international certifications.
4. This product has significant economic benefits and good application prospects.

our product

bg


newly rtv silicone rubber economical  manufacturer for screws-1
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.

Application

bg


The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.

newly rtv silicone rubber economical  manufacturer for screws-2

Microwave oven adhesive seal

newly rtv silicone rubber economical  manufacturer for screws-3

Radiator filling and bonding

newly rtv silicone rubber economical  manufacturer for screws-4

Refrigerator bonding seal


newly rtv silicone rubber economical  manufacturer for screws-5

Semiconductor material bonding

newly rtv silicone rubber economical  manufacturer for screws-6

Thyristor filling and bonding

newly rtv silicone rubber economical  manufacturer for screws-7

CPU bonding



product Performance

bg


TypeSD916SD9201SD920
Colorwhitewhitewhite
Viscosity(cp)pastepastesemi-fluid
Density(g/cm3)2.0~2.52.0~2.53.0~3.5
Tack-free time(25℃,min)≤30≤30≤30
Tensile strength (MPa)≥2.5≥2.5≥2.5
Elongation(%)≥100≥100≥100
Shear strength(MPa)≥1.5≥1.5≥1.5
Hardness (shore A)50~6550~6550~65
Temperature range(℃)-60~280-60~280-60~280
Dielectric intesity(kV/mm)≥18≥18≥18
Permittivity(@60Hz)2.82.82.8
Volume Resistance(Ω.cm)1×10151×10151×1015
Thermal conductivity(w/(m.k)) 1.20.82.0

Product details

bg
newly rtv silicone rubber economical  manufacturer for screws-8
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
newly rtv silicone rubber economical  manufacturer for screws-9
Eco-environmental protection
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
newly rtv silicone rubber economical  manufacturer for screws-10
White paste
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
newly rtv silicone rubber economical  manufacturer for screws-11
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle

Use instructions

bg


  • Cleaning the surface of the adhered or coated object to remove rust, dust and oil.

  • Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.

  • Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.

Notes:

  • 1.   Keep thermal paste out of reach of children.

  • 2.   Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.


Company Features
1. Huizhou SANDAO New Material Co., Ltd is an experienced and reliable company in designing, manufacturing and distributing cost-effective products such as rtv silicone rubber .
2. We have a professional team covering the entire breadth of the design and manufacturing process. They are highly qualified in engineering, design, manufacturing, testing and quality control for years.
3. Our companies align ourselves with a social cause. We concern the development of our society. We devote to supplying communities with capitals or resources if there are any natural disasters happen. Welcome to visit our factory! We adhere to the spirit of 'service-oriented and integrity management'. We will strive hard to establish stable and long-term business cooperations with clients, offer them professional guidance and advice, and get their recognization. We have made a long-term plan for environmental protection and energy conservation. We execute this plan seriously throughout the production stages. And we have achieved progress in reducing greenhouse gases and energy consumption. We have refined a customer-centric belief system, focusing on delivering a positive experience and providing unparalleled levels of attention and support so customers can focus on growing their business.
Every SANDAO rtv silicone is tested in-house for stability, compatibility, microorganism, and packaging testing to meet the regulations of the beauty makeup industry. Meixin products have been exported to India, South American and so on
SANDAO rtv silicone has been assessed on its workmanship. It has been checked in terms of color shading and colorfastness (rub test), accessories safety. Meixin keeps strict quality control of the products
SANDAO rtv silicone undergoes numerous stages of production before it is completed. These stages include designing, stamping, sewing (the pieces composing the shaft are sewn together), and die assembling. Meixin products enjoy one-year warranty
SANDAO rtv silicone rubber is designed with a scientific system. This system includes a sterilization system to reliably supply the desired water quality. Meixin innovative ability enables to constantly develop new products
The production process of SANDAO rtv silicone rubber is rigorously inspected. It is checked for the colorfastness of fabrics, the fastness of accessories, and the overall bag construction.
It has the advantage of color fastness to washing. Before production, the fibers will be pre-washed under clean water to check its fastness and re-washed under specific chemical liquid at a certain temperature. Meixin products have been exported to India, South American and so on
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...