The design of SANDAO rtv silicone has many steps. They are rough-in carcass proportions, block in spatial relationships, assign overall dimensions, select design form, configure spaces, choose the construction method, design details & embellishments, color and finish, etc. Without any halogen, it is healthy and environmentally friendly2.
The product is successful in getting customers' satisfaction and has a broad market application prospect. It should be fully cured before realizing its use value3.
The product has a better performance than other similar products in the market. And it can be heat conductive, anti-corrosive, and temperature resistant after curing4.
The product has long service life, enabling the long-time uses. Its quality directly benefits the service life of the products that use it
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
|Color||Colorless transparent ||white||black|
|Tensile strength (MPa)||2.0||2.0||2.0|
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
100g/tube 310ml/cartridge 2.6L/bottle
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packaging and preservation
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Huizhou SANDAO New Material Co., Ltd is a reliable Chinese company. Our story spans many years of excellence in designing and manufacturing rtv silicone . Expect the work of our professional staff, the advanced machine also contributes to the quality assurance of rtv silicone rubber .2.
Huizhou SANDAO New Material Co., Ltd has high-tech core technology, strong R&D and manufacturing capabilities for One-component RTV silicone rubber TDS.3.
It is rtv silicone rubber that makes our products more standing out. A professional technical support team form rtv silicone rubber is standing behind, ready to help you at any time. Get an offer!