SANDAO  >  AI - Page Sitemap  >  newly MS adhesive series sealant long-term-use for fixing products
newly MS adhesive series sealant long-term-use for fixing products

newly MS adhesive series sealant long-term-use for fixing products
  • newly MS adhesive series sealant long-term-use for fixing products
  • newly MS adhesive series sealant long-term-use for fixing products
  • newly MS adhesive series sealant long-term-use for fixing products
  • newly MS adhesive series sealant long-term-use for fixing products
  • newly MS adhesive series sealant long-term-use for fixing products
  • newly MS adhesive series sealant long-term-use for fixing products
  • newly MS adhesive series sealant long-term-use for fixing products
  • newly MS adhesive series sealant long-term-use for fixing products

newly MS adhesive series sealant long-term-use for fixing products

As a MS adhesive series provider, SANDAO is dedicated to improving quality and professional services.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The quality of SANDAO MS adhesive series is strictly controlled. From materials selecting, sawn-cutting, hole cutting, and edge processing to packing loading, each step is inspected by our QC team. It is resistant to high temperature and low-temperature alternation
2. MS adhesive series can be designed to different styles according to customer's actual requirements. After curing, it can withstand torque without breaking
3. Effective QC system is carried out through the production of the product to ensure the consistent quality. It has a wide range of properties that include chemical resistance
4. The product is highly valued for its unparalleled quality and practicality. It has excellent electrical insulation performance
5. The product has stable performance, good usability, and reliable quality, which has been approved by the authoritative third party. Without any halogen, it is healthy and environmentally friendly

our product

bg


newly MS adhesive series sealant long-term-use for fixing products-1

MS-SD818  General purpose sealant 

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

bg



Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.  


newly MS adhesive series sealant long-term-use for fixing products-2

Cabinet corner bonding

newly MS adhesive series sealant long-term-use for fixing products-3

Electrical bonding

newly MS adhesive series sealant long-term-use for fixing products-4

Electronic Components


newly MS adhesive series sealant long-term-use for fixing products-5

kitchen

newly MS adhesive series sealant long-term-use for fixing products-6

Window bonding

newly MS adhesive series sealant long-term-use for fixing products-7

window gap bonding



product Performance

bg


TypeSD818
Coloryellow

Viscosity (pa.s) 10rpm

900

Initial curing time(mins)

30

100% modulus (Mpa)1.2
Elongation at break(N/mm)230
Tensile strength(MPa)1.5

Product details

bg
newly MS adhesive series sealant long-term-use for fixing products-8
MS-SD818  General purpose sealant
MS-SD818  General purpose sealant
newly MS adhesive series sealant long-term-use for fixing products-9
Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

newly MS adhesive series sealant long-term-use for fixing products-10
Environmental protection
No solvent, environmental protection, odorlessness, instant positioning.
newly MS adhesive series sealant long-term-use for fixing products-11
Storage
Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

bg


The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes:

  • 1. Not suitable for: adhesion of smooth surface substrates.

  • 2. Maximum endurance curing time: 24 hours.

  • 3. Construction environment temperature: 5 ℃ ~ 40 ℃.

  • 4. The operating temperature shall not be lower than-20 ℃  or above 65 ℃.

  • 5. Store in a cool and dry place under normal temperature, storage period is 12 months.



Company Features
1. As a MS adhesive series provider, SANDAO is dedicated to improving quality and professional services.
2. We have a perfect quality control system, and we have obtained the ISO 9001 international quality system certification. All of our production processes will comply with the regulations stipulated in this system.
3. Since the inception till now, we have been adhering to the principle of integrity. We always conduct business trade in accordance with fair and refuse any vicious business competition.
The quality control of SANDAO ms polymer adhesive strictly complies with the regulations of ceramic tableware industry, including the raw materials and the workmanship of glaze decoration. The wheel provides the perfect combination of softness, durability, and grip
SANDAO MS adhesive series is rigorously checked for fatigue resistance of shoe heels, attachment strengths of decorative, peel strength of footwear sole bonds, and slip resistance. It absorbs the impact of uneven floors, providing smooth rolling
SANDAO ms polymer adhesive has to be inspected to ensure that it has enough physical strength which enables it to withstand wear and shock force. Its metal structure body is wear- and dirt- resistant
The manufacturing of SANDAO ms polymer adhesive is carried out through the following processes: metal materials preparation, turning, milling, boring, welding, marking, and assembling. The proper thickness and width of its wheel make it safely support loads while at rest and while moving
Before the SANDAO ms polymer adhesive is stored or shipped, the finishing operations and inspection remain to be performed following curing. The finishing operation trims flash or excess rubber. It is ideal for such floors as wood, laminate, ceramic, terracotta or carpeted
It has good strength. Its materials have the required toughness to resist deformation under stress and resist fracture due to high impact load. Its wheel face design reduces friction and minimizes tread wear
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...