SANDAO  >  AI - Page Sitemap  >  new-arrival Two-component addition-type potting adhesive TDS resin for metalparts
new-arrival Two-component addition-type potting adhesive TDS resin for metalparts

new-arrival Two-component addition-type potting adhesive TDS resin for metalparts
  • new-arrival Two-component addition-type potting adhesive TDS resin for metalparts
  • new-arrival Two-component addition-type potting adhesive TDS resin for metalparts
  • new-arrival Two-component addition-type potting adhesive TDS resin for metalparts
  • new-arrival Two-component addition-type potting adhesive TDS resin for metalparts
  • new-arrival Two-component addition-type potting adhesive TDS resin for metalparts
  • new-arrival Two-component addition-type potting adhesive TDS resin for metalparts

new-arrival Two-component addition-type potting adhesive TDS resin for metalparts

This product has good sewing workmanship. It does not have seam problems such as untrimmed threads due to the strict requirement for internal QC check the trimming.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • SANDAO New Material treats customers with sincerity and dedication and strives to provide them with excellent services.
Product Comparison
silicone adhesive is in line with the stringent quality standards. The price is more favorable than other products in the industry and the cost performance is relatively high.SANDAO New Material's silicone adhesive is produced in strict accordance with standards. We make ensure that the products have more advantages over similar products in the following aspects.
Company Advantages
1. SANDAO Two-component addition-type potting adhesive TDS comes with a variety of styles to meet with different market needs.
2. The product has high seaming quality. It does not have broken stitches, miss stitches, and skipping stitches that may all lead to loose thread and poor seam quality.
3. This product has good sewing workmanship. It does not have seam problems such as untrimmed threads due to the strict requirement for internal QC check the trimming.
4. Thanks to the high market recognition, the product has a great market application.
5. Huizhou SANDAO New Material Co., Ltd has set up a perfect quality guarantee system and a sound management system.

our product

bg


new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-1
Sandao organic silicon electronic potting sealant SD9501
Sandao organic silicon electronic potting sealant SD9501 is synthesis organo silicon electronic pouring sealant with high elasticity and high transparent for electronic component, packing divided to A and B two component, mixes the A and B two components and fully agitates before filling and sealing; The mixture has good fluidity, good elasticity after curing, excellent resistance to high and low temperature, excellent electrical performance, ozone resistance and atmospheric aging resistance, which is used for long-term outdoor use. The products are in full compliance with the requirements of the EU RoHS Directive.

Feature

  • ◪   Resistance to high and low temperature  -60~260℃

  • ◪   Sandao organic silicon electronic pouring sealant with the advantages of automatic leveling, automatic remove air bubbles, high viscosity, high temperature resistance, moisture proof and waterproof insulation, easy rework, it can used as adhesive, sealing, waterproof, moisture-proof, mildew proof, dustproof, filling seal, shock absorption, aging resistance and so on.

Application

bg


This potting sealant is fit for electrical and electronic components which required for waterproof and insulation, used for adhesive and sealing LED junction box, wind power motor, PCB substrate, etc., as well as various AC/DC power supply modules, control modules, automotive HID stabilizers, lights and various power control modules,etc.

new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-2

DC power module bonding

new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-3

LED junction box bonding

new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-4

Wind energy motor bonding


new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-5

Power module

new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-6

PCB board bonding

new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-7

Lamp part Bonding



product Performance

bg


No.ItemStandardStandardStandard
1Before curingPart Aappearancetransparentblackwhite
2viscosity(m Pa·S)800~1000800~1000800~1000
3density(g/cm3)0.95~1.00.95~1.00.95~1.0
4Part Bappearancetransparenttransparenttransparent
5viscosity (m Pa·S)50-15050-15050-150
6density (g/cm3)1.0-1.31.0-1.31.0-1.3
7viscosity after mix(m Pa·S)1000~13001000~13001000~1300
8mix ratio100:10100:10100:10
9Operable time(min)<30<30<30
1060℃ heating curing time(min)303030
11Room temperature curing time(hr)242424
12After curinghardness(shore A,24hr)30~5030~5030~50
13tensile strength(MPa)≥0.8≥0.8≥0.8
14volume resistivity(Ω·cm)≥1.0×1015≥1.0×1015≥1.0×1015
15dielectric strength(kv/mm)≥ 20≥ 20≥ 20
16bake(80℃  144h)Not yellow --

Kind remind: The above properties were measured at 25 ℃ and 55% RH for 7 days. The parameters provided in this data may vary depending on the environmental, temperature and humidity conditions;

Product details

bg
new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-8
Silicone electronic potting
SD9501 integrated silicone electronic potting Compound, high elasticity, high transparent Electronic components potting glue.
new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-9
White/black viscous liquid
Good fluidity, good elasticity, excellent resistance to high and low temperature, excellent electrical performance.
new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-10
Green environmental protection
Non-toxic and non-corrosive,The products fully comply with the requirements of EU RoHS standard
new-arrival Two-component addition-type potting adhesive TDS resin for metalparts-11
Iron bottle packaging
packing specification: 20kg/set ,component A/10kg .component B/10kg.

Use instructions

bg


  Caution
  • 1.   Mix the two components according to the weight ratio of A:B=1:1 and stir well, then remove air bubbles (vacuum or static) and then fill it up.  Note: must stir evenly, otherwise affect the properties of solidified compounds; should be used within the applicable period of the sealant.

  • 2.   About mixing; After mixing component A and component B, manual or mechanical mixing can be adopted. When mixing, high temperature should be avoided because of high speed and long time agitation, so as to avoid shortening operation time and speeding up solidification, in case operate time is not enough. The surface of the product must be cleaned before it is sealed.

  • 3.   The work site and working environment must maintain the air circulation, in case the concentration is too high after the chemical liquid volatilize in the air, causes the staff to be sick (respiratory tract and skin irritation etc.).

  • 4.   The surface in contact with the compound must be cleaned. It is forbidden to mix the compound with organic compounds containing nitrogen, phosphorus, sulfur and heavy metal ions containing Sn,Ph,Hg, Bi, As , in case affect the curing of the compound.

Packaging and preservation

bg


20kg/ set (component A 10kg and B 10kg), transported as non-dangerous goods, stored in a cool (room temperature) dry place, guarantee period is 6 months.


Company Features
1. Huizhou SANDAO New Material Co., Ltd is technologically advanced as a Two-component addition-type potting adhesive TDS manufacturer.
2. Huizhou SANDAO New Material Co., Ltd has successfully achieved intensive expansion based on technological innovation.
3. The aim that SANDAO always sticks to is to build SANDAO into a world-famous company. Check it! SANDAO's commitment is to provide the best customer service in the industry. Check it! SANDAO's great wish is to be a leading Two-component addition-type potting adhesive TDS supplier in the next future. Check it!
With the design of ge rtv silicone, our ge rtv silicone is notably suitable for the usage in ge rtv silicone.
The body framework of ge rtv silicone using Two-component addition-type potting adhesive TDS concept has more advantages.
Huizhou SANDAO New Material Co., Ltd thinks highly of material, and has a professional team for purchasing material of Two-component addition-type potting adhesive TDS.
With its key component being Two-component addition-type potting adhesive TDS, ge rtv silicone has a good performance on Two-component addition-type potting adhesive TDS.
The crucial material for Two-component addition-type potting adhesive TDS mainly includes Two-component addition-type potting adhesive TDS which is the best.
The solar panel part of the product needs low maintenance. There is no moving part on the panel and it is highly durable.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...