SANDAO  >  AI - Page Sitemap  >  new-arrival One-component RTV silicone rubber TDS silica for screws
new-arrival One-component RTV silicone rubber TDS silica for screws

new-arrival One-component RTV silicone rubber TDS silica for screws
  • new-arrival One-component RTV silicone rubber TDS silica for screws
  • new-arrival One-component RTV silicone rubber TDS silica for screws
  • new-arrival One-component RTV silicone rubber TDS silica for screws
  • new-arrival One-component RTV silicone rubber TDS silica for screws
  • new-arrival One-component RTV silicone rubber TDS silica for screws
  • new-arrival One-component RTV silicone rubber TDS silica for screws
  • new-arrival One-component RTV silicone rubber TDS silica for screws
  • new-arrival One-component RTV silicone rubber TDS silica for screws

new-arrival One-component RTV silicone rubber TDS silica for screws

Its prototype is continually tested against a wide variety of key performance criteria before going into production. It is also tested for conformity with a series of international standards.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
SANDAO New Material has professional production workshops and great production technology. ms adhesive we produce, in line with the national quality inspection standards, has reasonable structure, stable performance, good safety, and high reliability. It is also available in a wide range of types and specifications. Customers' diverse needs can be fully fulfilled.SANDAO New Material's ms adhesive has better quality than other products in the industry, which is specifically shown in the following aspects.
Enterprise Strength
  • SANDAO New Material can provide quality products for consumers. We also run a comprehensive after-sales service system to solve all kinds of problems in time.
Company Advantages
1. During the development phase, the materials of SANDAO One-component RTV silicone rubber TDS have been tested on its performance including bending test, tensile test, rubbing fastness test, and water repellency test.
2. Its prototype is continually tested against a wide variety of key performance criteria before going into production. It is also tested for conformity with a series of international standards.
3. It's been a year of wearing this product at least once a week and it is only now starting to look a bit tarnished. - Said one of our customers.

our product

bg


new-arrival One-component RTV silicone rubber TDS silica for screws-1
Printed circuit board coating SD399
Printed circuit board coating SD399 is a fluid, one-component, fast-curing, non-corrosive silicone rubber adhesive sealant that cures into a silicone elastomer in air. This product complies with: MIL-A-461468 Corrosive Test Standard. Excellent electrical insulation performance against ozone and chemical attack.

Application

bg


The silicone adhesive is suitable for waterproofing of electronic coatings, LCD modules for potting, solar energy, automobiles, home appliances, electrical appliances, circuit boards, etc.

new-arrival One-component RTV silicone rubber TDS silica for screws-2

Ceramic bonding

new-arrival One-component RTV silicone rubber TDS silica for screws-3

LCD module

new-arrival One-component RTV silicone rubber TDS silica for screws-4

Metal bonding


new-arrival One-component RTV silicone rubber TDS silica for screws-5

Plastic bonding

new-arrival One-component RTV silicone rubber TDS silica for screws-6

Electronic product bonding

new-arrival One-component RTV silicone rubber TDS silica for screws-7

Glass bonding



product Performance

bg


TypeSD399SD399BSD399W
ColorColorless transparent semi-fluidBlack semi-fluidWhite semi-fluid
Density(g/cm3)1.0~1.11.0~1.11.0~1.1
Tack-free time(25℃,min)≤40≤40≤40
Tensile strength(MPa)≥1.5≥1.5≥1.5
Elongation(%)200~300200~300200~300
Shear strength(MPa)≥1.0≥1.0≥1.0
Hardness(shore A)20~3020~3020~30
Temperature (℃)-50~200-50~200-50~200
Permittivity(@60Hz)2.82.82.8
Dielectric intesity(kV/mm)≥20≥20≥20
Volume Resistance(Ω.cm)2.0×10152.0×10152.0×1015

Product details

bg
new-arrival One-component RTV silicone rubber TDS silica for screws-8
SD399 circuit board coated with silicone
SD399 circuit board coating is a fluid, one-component, fast curing, non-corrosive silicone rubber adhesive sealant.
new-arrival One-component RTV silicone rubber TDS silica for screws-9
Green environmental protection
Rapid vulcanization, very low odor, release of alcohol vapor during vulcanization
new-arrival One-component RTV silicone rubber TDS silica for screws-10
Colorless transparent rogue
Excellent heat resistance and cold resistance, -50 to 200 ° C, excellent weather resistance, ozone resistance and chemical resistance, excellent electrical insulation properties
new-arrival One-component RTV silicone rubber TDS silica for screws-11
Long storage period
Store in a cool, dry place with a shelf life of six months. Packing specification: 330ML / PCS or according to customer requirements.

Use instructions

bg


  • First, surface of the substrate is cleaned to remove rust, dust and oil.

  • Second the silicone adhesive sealant has a surface cure time of about 20 minutes and is fully cured after 24 hours.

Notes:

  • 1.   Keep thermal paste out of reach of children.

  • 2.   Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.


Company Features
1. Established years ago, Huizhou SANDAO New Material Co., Ltd has acquired a distinguished position amidst the leading manufacturers and exporters of rtv silicone in China.
2. The perfected manufacturing processes and quality assurance system in SANDAO New Material's factory ensure reliable delivery of products with high quality.
3. We want to bring high-quality products and services to our customers. We will address the challenges of a changing market quickly and never compromise on quality. We recognize that the key to every product development and successful customer outcome is our internal culture of innovation. We embrace continuous improvement and change, which positions us and, by extension our customers, for the future. We think positively about sustainable development. We put active efforts on reducing production waste, increasing resource productivity, and optimizing material usage. Our company bears social responsibility. We work with local energy providers that use green energy sources to generate power that is free of carbon emissions and other GHG.
In creating the design of SANDAO rtv silicone, many elements are taken into account. These elements are the arrangement of lines, shapes, colors, and texture.
SANDAO One-component RTV silicone rubber TDS undergoes a series of quality tests. They include symmetry check of fabrics, colorfastness, adhesive check (logos, tag, care labeling), stitch damage check, etc.
The design of SANDAO rtv silicone is a good integration of all fashion elements. They are color, texture, lines, shape (silhouette), proportion, and so forth.
The manufacturing of SANDAO rtv silicone is generally performed with several steps. These steps include cutting out materials into various shapes, sewing components together, shaping, polishing, and finishing.
SANDAO rtv silicone must go through workmanship assessments. It will be assessed with regard to stitching looseness, seam strength, and color consistency.
In a flock of One-component RTV silicone rubber TDS, rtv silicone has many excellent characteristics of [拓展关键词 and so on.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...