Home  > PRODUCT  > MS adhesive series  >  SD818 MS adhesive sealant for concrete walls
SD818  MS adhesive sealant for concrete walls

SD818 MS adhesive sealant for concrete walls

Model number
SD818
MOQ
1pcs
Color
yellow
Package
330ml/set
Main characteristic
high-strength elastic bonding, seal repair,water and temperature resistance, instant positioning.
Main application
concrete walls,wood panels,ceramic products,metals,stone and so on.
Lead time
within a week after payment

our product

bg


MS-SD818  General purpose sealant 

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

bg



Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.  


Cabinet corner bonding

Electrical bonding

Electronic Components


kitchen

Window bonding

window gap bonding



product Performance

bg


TypeSD818
Coloryellow

Viscosity (pa.s) 10rpm

900

Initial curing time(mins)

30

100% modulus (Mpa)1.2
Elongation at break(N/mm)230
Tensile strength(MPa)1.5

Product details

bg
MS-SD818  General purpose sealant
MS-SD818  General purpose sealant
Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

Environmental protection
No solvent, environmental protection, odorlessness, instant positioning.
Storage
Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

bg


The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes:

  • 1. Not suitable for: adhesion of smooth surface substrates.

  • 2. Maximum endurance curing time: 24 hours.

  • 3. Construction environment temperature: 5 ℃ ~ 40 ℃.

  • 4. The operating temperature shall not be lower than-20 ℃  or above 65 ℃.

  • 5. Store in a cool and dry place under normal temperature, storage period is 12 months.


Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...