MS adhesive series | MS adhesive series

Product Information
Customer Reviews

Company Advantages
1. SANDAO ms polymer adhesive is manufactured by highly skilled professionals with rich years of experiences in the industry. It is resistant to high temperature and low-temperature alternation
2. Huizhou SANDAO New Material Co., Ltd has developed a variety of high-tech products that are in line with international standards. It has good adhesion to a variety of materials
3. This product is thoroughly tested on various stages by our quality controllers as per the set industrial norms. It has excellent electrical insulation performance
4. The product meets the requirements of testing after many time trials. Its curing exothermic peak is low and the curing shrinkage is small
5. Its reliability is backed by our expert and experienced professionals. After curing, it can be waterproof, dampproof, and dustproof

our product

Healthy antimicrobial and anti-mildew adhesive SD858

In daily life, black mold breeding phenomenon everywhere, not only caused the pollution of the living environment, but also long-term harm to people's physical and mental health;

Sandao Healthy antimicrobial and anti-mildew adhesive D858 is a professional anti-mildew antibacterial sealant, compared with the ordinary anti-mildew gel on the market, D858’s polymer structure can more effectively inhibit the breeding of mold, the protection time is longer.

There is no formaldehyde, no toluene, no solvent, no isocyanate, no toxic and tasteless, the content of volatile organic compounds （VOC）is almost 0, the product itself is healthy and environmental protection, the mildew prevention performance is longer, more outstanding.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

Bathroom

Bathroom

Cold storage

hospital

kitchen

window gap bonding

product Performance

Type	SD858
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

SD858 Antibacterial and Antifungal Adhesive

SD858 is a professional anti-mildew and anti-bacterial sealant. The macromolecule structure can more effectively inhibit the growth of mildew, and the protection time is longer.

Light yellow

The polymer network structure firmly locks the antibacterial property, inhibits the growth of mold, and has a longer aging time.

Green environmental protection

Formaldehyde free, no toluene, no solvent, no isocyanate, non-toxic and tasteless

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. Huizhou SANDAO New Material Co., Ltd is broadly regarded as a reliable manufacturer of MS adhesive series.
2. With scientific methods of technology, the quality of MS adhesive series is efficiently guarantee.
3. To stay ahead, Huizhou SANDAO New Material Co., Ltd continuously improve and think in new ways. Please contact.

Favorable rate

100%

Buyer impression