MS adhesive series | MS adhesive series

Product Information
Customer Reviews

Application Scope

silicone adhesive developed and produced by SANDAO New Material is widely used. The following are several application scenes presented for you.SANDAO New Material insists on providing customers with comprehensive solutions based on their actual needs, so as to help them achieve long-term success.

Company Advantages
1. Cost-effective raw materials: the raw materials of SANDAO ms polymer adhesive are selected at the lowest prices, which have unique attributes that are suitable for the production of the product.
2. Compared with the other similar products, MS adhesive series has a lot of advantages, such as ms polymer adhesive.
3. By reason of advanced technology and experienced team, SANDAO has been growing rapidly since founded.

our product

Building adhesives-SD958 super type

MS adhesive, also known as "modified silane polyether adhesive", is based on MS Polymer polymer, the raw material system contains no solvent, zero formaldehyde, zero toluene, no isocyanate and other toxic raw materials. The release of VOC (volatile organic compounds) is almost zero, so it is known as "the greenest new generation sealant".

SD958 super adhesive is a kind of all-purpose adhesive, which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

Corner bonding

Electronic Components

Marble bonding

Metal bonding

Tile bonding

window gap bonding

product Performance

Type	SD958
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

Building adhesives-SD958 super type

SD958 super adhesive is a kind of all-purpose adhesive.

Light yellow

Which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. Huizhou SANDAO New Material Co., Ltd is expanding its factory scale to get higher capacity for MS adhesive series.
2. Huizhou SANDAO New Material Co., Ltd has a number of product design elites with rich market experience.
3. Huizhou SANDAO New Material Co., Ltd will strive to further enhance its brand influence and cohesion. Contact! We firmly believe that our ms polymer adhesive and ms polymer adhesive will be your best choice. Contact!

Favorable rate

100%

Buyer impression