Once you've got received the new set of doors and are positive that they are the proper dimension for your opening, you will need to go ahead and remove the aged door system from the opening. Just before you set the new set of Exterior French Doors you'll desire to location a line of silicone sealant on the floor to support seal the new set of doors.
Subsequent lift the new door set into the opening and make positive that it's degree on all sides. This can be a most significant action - as if the door isn't level when installed then the door wont actually close properly and may rub, stick, or be typically out of alignment when you look at it.
If the door is from plumb (degree) you'll need to have to make use of shims (modest items of angled wood) between the opening and the new prehung fame to being the prehung body into degree. As soon as every thing is stage then it is possible to begin to screw the frame into the opening.
After you've installed many screws examine the door for plumb again. One straightforward way to check for plumb is to take a look at the gaps around the door. All the gaps really should be even. If the width of the gaps isn't even, then the door will not run properly, and you ought to adjust the door once more with shims. It may even be necessary to get rid of or reposition the unique mounting screws. One more trick would be to get an additional long mounting screw and drive it in close to one of the hinges that you'll want to pull back. This extra pressure in the area of the hinge can adjust how the door swings and may help with alignment.
As soon as you've got completed mounting the door and eliminated all the packing content, you'll want to go a head and mount all the door hardware. When finished examine for proper operation of the door hardware
Like a final finishing action you'll want to fill any cracks or holes around the jam with some insulation. After that is total you'll need to have to install the moldings about the door and paint to finish.