Our SANDAO Two-component epoxy structure bonding is designed and manufactured in line with clients' ever-evolving requirements. 2.
The solar panel part of the product needs low maintenance. There is no moving part on the panel and it is highly durable. 3.
The product can meet the ever-changing needs overwhelmingly. 4.
Huizhou SANDAO New Material Co., Ltd has extended our business to many overseas countries and regions to form a truly global network.
Electronic parts bonding potting adhesive SD868
Metal & plastic adhesive AB glue SD868 is a two-component high-temperature resistant adhesive based on epoxy resin. It has advantage of high strength, weak acid and alkali resistance, impact resistance, low smell, resistance to most chemical media, extreme temperature and excellent electrical insulation. Mainly suitable for high temperature resistant metal, ceramic, etc.
◪ Electronic parts bonding potting adhesive SD868 has the advantages of fast curing , wide application, high bonding strength, water resistance, oil resistance, fatigue resistance.
◪ Excellent resistance to high and low temperature. It can work in the temperature range of 60-150 ℃.
Sandao Metal & plastic adhesive AB glue SD868 is widely used in solid assembly of industrial components, such as sporting goods, solar, wind, composite materials, electronics, transportation and aerospace bonding reinforcement, adhesive synthesis, assembly, packaging, filling and sealing. It is especially suitable for bonding and packaging of electronic parts. There are many formulations to connect steel, aluminum, copper with low surface energy level plastics, glass, wood, masonry and other materials.
Electroplating paint bonding
|Epoxy resin AB glue||SD868 part A||SD868 part B|
|Appearance /color||transparent||dark brown|
|Viscosity (mPa.s 25℃)||8000-12000||10000-13000|
|Specific gravity (g/ml 25℃)||1.0-1.05||1.0-1.05|
|Ratio（weight ratio pbw）||10||1|
|Gel time under normal temperature（25℃）20g||2-4h|
|Curing time|| 80℃||30mins|
|Active hydrogen equivalentg/eq||/||185/195|
|Distortion temperature HDT||80℃|
|Solume resistivity（Ω.cm）25℃||1.0~1015 |
|Surface resistivity（Ω.cm）25℃||0.9×1015 |
|Shear strength of different materials（Mpa）|
|Aluminum / copper||16-19|
Epoxy resin structural adhesive
SD868 is a high strength acrylate structural adhesive with a two component 10:1 system.
It has fast bonding and firmness. hard and tough after curing. high bonding strength and impact resistance, and good resistant to aging and solvent.
Green environmental protection
Low odor, no pollution, high strength, weakAcid and alkali resistance, impact resistance High bonding strength, water resistance
Oil resistance and fatigue resistance.
AB mixing tube
Very convenient to use, packaging specifications: specifications are 64g / support.
Put on AB glue gun and put on the thread mixing head.
The thickness of adhesive layer should be 0.05mm, the coated object should be clamped immediately, and the maximum bonding strength will be guaranteed by uniform contact pressure.
To obtain the highest mechanical strength, the surface of the material can be polished or sandblasted, and then the dust and oil stains on the surface can be scrubbed with a special solvent.
Adhesive should be put on both sides of the object and fix the splice in avoid of dislocation. Do not mix the lid of A and B to prevent contamination of the gum.
1. This product is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Packaging and preservation
Epoxy resin AB sealant is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods, should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.Company Features1.
Huizhou SANDAO New Material Co., Ltd enjoys a high reputation in the field of epoxy resin adhesive production. 2.
The company has established a strong R&D team. They are equipped with industry knowledge and experience. This enables them to offer professional advice on product custom or innovation. 3.
Years of solid development have provided us a very clear notion: be innovative and hungry for development. We will continue to enhance our R&D ability by exploiting the power of advanced and technologies, as well as the keen insight into market trends. In our corporate culture, we believe everyone is an innovator. We value every creative idea and strive to create various platforms and tools for employees to develop and learn. We believe this will ultimately bring practical benefits to clients.