SANDAO  > 

AI - Page Sitemap

 > 

hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts

hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts

Hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts

Model number
SD9501
MOQ
1pcs
Color
Transparent/White/black liquid
Package
20kg/ set
Main characteristic
Ratio is 1:1, good elasticity after curing, waterproof and insulation
Main application
electrical and electronic components, LED junction box, wind power motor, PCB substrate etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • SANDAO New Material insists that service is the basis of survival. We are committed to providing professional and quality services.
Product Comparison
ms adhesive is in line with the stringent quality standards. The price is more favorable than other products in the industry and the cost performance is relatively high.SANDAO New Material's ms adhesive has been further improved based on advanced technology, as reflected in the following aspects.
Company Advantages
1. As an electronic and optical device, SANDAO ge rtv silicone has been investigated and improved many times. We spent a lot of energy and time to improve its lighting performance.
2. The improved quality management system guarantees the higher quality of this product.
3. Advanced technology and first-class equipment allow Huizhou SANDAO New Material Co., Ltd to be confident that we can guarantee prompt delivery and guarantee quality.

our product

bg


hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-1
Sandao organic silicon electronic potting sealant SD9501
Sandao organic silicon electronic potting sealant SD9501 is synthesis organo silicon electronic pouring sealant with high elasticity and high transparent for electronic component, packing divided to A and B two component, mixes the A and B two components and fully agitates before filling and sealing; The mixture has good fluidity, good elasticity after curing, excellent resistance to high and low temperature, excellent electrical performance, ozone resistance and atmospheric aging resistance, which is used for long-term outdoor use. The products are in full compliance with the requirements of the EU RoHS Directive.

Feature

  • ◪   Resistance to high and low temperature  -60~260℃

  • ◪   Sandao organic silicon electronic pouring sealant with the advantages of automatic leveling, automatic remove air bubbles, high viscosity, high temperature resistance, moisture proof and waterproof insulation, easy rework, it can used as adhesive, sealing, waterproof, moisture-proof, mildew proof, dustproof, filling seal, shock absorption, aging resistance and so on.

Application

bg


This potting sealant is fit for electrical and electronic components which required for waterproof and insulation, used for adhesive and sealing LED junction box, wind power motor, PCB substrate, etc., as well as various AC/DC power supply modules, control modules, automotive HID stabilizers, lights and various power control modules,etc.

hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-2

DC power module bonding

hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-3

LED junction box bonding

hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-4

Wind energy motor bonding


hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-5

Power module

hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-6

PCB board bonding

hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-7

Lamp part Bonding



product Performance

bg


No.ItemStandardStandardStandard
1Before curingPart Aappearancetransparentblackwhite
2viscosity(m Pa·S)800~1000800~1000800~1000
3density(g/cm3)0.95~1.00.95~1.00.95~1.0
4Part Bappearancetransparenttransparenttransparent
5viscosity (m Pa·S)50-15050-15050-150
6density (g/cm3)1.0-1.31.0-1.31.0-1.3
7viscosity after mix(m Pa·S)1000~13001000~13001000~1300
8mix ratio100:10100:10100:10
9Operable time(min)<30<30<30
1060℃ heating curing time(min)303030
11Room temperature curing time(hr)242424
12After curinghardness(shore A,24hr)30~5030~5030~50
13tensile strength(MPa)≥0.8≥0.8≥0.8
14volume resistivity(Ω·cm)≥1.0×1015≥1.0×1015≥1.0×1015
15dielectric strength(kv/mm)≥ 20≥ 20≥ 20
16bake(80℃  144h)Not yellow --

Kind remind: The above properties were measured at 25 ℃ and 55% RH for 7 days. The parameters provided in this data may vary depending on the environmental, temperature and humidity conditions;

Product details

bg
hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-8
Silicone electronic potting
SD9501 integrated silicone electronic potting Compound, high elasticity, high transparent Electronic components potting glue.
hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-9
White/black viscous liquid
Good fluidity, good elasticity, excellent resistance to high and low temperature, excellent electrical performance.
hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-10
Green environmental protection
Non-toxic and non-corrosive,The products fully comply with the requirements of EU RoHS standard
hot-sale Two-component addition-type potting adhesive TDS sealant producer for ceramic parts-11
Iron bottle packaging
packing specification: 20kg/set ,component A/10kg .component B/10kg.

Use instructions

bg


  Caution
  • 1.   Mix the two components according to the weight ratio of A:B=1:1 and stir well, then remove air bubbles (vacuum or static) and then fill it up.  Note: must stir evenly, otherwise affect the properties of solidified compounds; should be used within the applicable period of the sealant.

  • 2.   About mixing; After mixing component A and component B, manual or mechanical mixing can be adopted. When mixing, high temperature should be avoided because of high speed and long time agitation, so as to avoid shortening operation time and speeding up solidification, in case operate time is not enough. The surface of the product must be cleaned before it is sealed.

  • 3.   The work site and working environment must maintain the air circulation, in case the concentration is too high after the chemical liquid volatilize in the air, causes the staff to be sick (respiratory tract and skin irritation etc.).

  • 4.   The surface in contact with the compound must be cleaned. It is forbidden to mix the compound with organic compounds containing nitrogen, phosphorus, sulfur and heavy metal ions containing Sn,Ph,Hg, Bi, As , in case affect the curing of the compound.

Packaging and preservation

bg


20kg/ set (component A 10kg and B 10kg), transported as non-dangerous goods, stored in a cool (room temperature) dry place, guarantee period is 6 months.


Company Features
1. Huizhou SANDAO New Material Co., Ltd specializes in providing high-quality Two-component addition-type potting adhesive TDS.
2. Quality speaks louder than number in Huizhou SANDAO New Material Co., Ltd.
3. Our mission is, to satisfy and meet the needs of our customers, providing our products and services with the quality, adjusted to their needs and preferences and to create value for our stakeholders through originality and strict adherence to our principles. Contact us! SANDAO ​​hopes to satisfy every customer with our excellent quality Two-component addition-type potting adhesive TDS and sincere attitude. Contact us! We take steps to formalize our environmental practices through the development of environmental policy. This will involve understanding and recording key environmental impacts, investigating opportunities for reducing these impacts. Hard-working, Efficient, Rigorous, Premium is always regarded as our working principle. We devote to increase productivity to manufacture products with superior quality. Contact us!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...