sealant MS adhesive series effectively for fixing products

Company Advantages
1. The design of SANDAO MS adhesive series is governed by a set of principles which are emphasis, rhythm, unity, balance and scale, and proportion. Long application period makes it suitable for large-volume automatic production line operations
2. It enjoys high popularity and reputation both at home and abroad. In some cases, it can achieve flame retardant, weathering, and thermal conductivity properties
3. MS adhesive series is superior to the other similar product in ms polymer adhesive. The product has achieved the requirement of mechanical property completely
4. Our MS adhesive series enjoy a good reputation from numerous customers through ms polymer adhesive, ms polymer adhesive and so on. Its quality directly benefits the service life of the products that use it

our product

hot-sale MS adhesive seriessealanteffectively for fixing products-1

Building adhesives-SD958 super type

MS adhesive, also known as "modified silane polyether adhesive", is based on MS Polymer polymer, the raw material system contains no solvent, zero formaldehyde, zero toluene, no isocyanate and other toxic raw materials. The release of VOC (volatile organic compounds) is almost zero, so it is known as "the greenest new generation sealant".

SD958 super adhesive is a kind of all-purpose adhesive, which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

hot-sale MS adhesive seriessealanteffectively for fixing products-2

Corner bonding

hot-sale MS adhesive seriessealanteffectively for fixing products-3

Electronic Components

hot-sale MS adhesive seriessealanteffectively for fixing products-4

Marble bonding

hot-sale MS adhesive seriessealanteffectively for fixing products-5

Metal bonding

hot-sale MS adhesive seriessealanteffectively for fixing products-6

Tile bonding

hot-sale MS adhesive seriessealanteffectively for fixing products-7

window gap bonding

product Performance

Type	SD958
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

hot-sale MS adhesive seriessealanteffectively for fixing products-8

Building adhesives-SD958 super type

SD958 super adhesive is a kind of all-purpose adhesive.

hot-sale MS adhesive seriessealanteffectively for fixing products-9

Light yellow

Which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.

hot-sale MS adhesive seriessealanteffectively for fixing products-10

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

hot-sale MS adhesive seriessealanteffectively for fixing products-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. MS adhesive series is produced by our modern production line and tested by our experienced technicians.
2. Huizhou SANDAO New Material Co., Ltd now has won the recognition of more customers due to its high quality service. Get price!

s******i

The design of SANDAO MS adhesive series is of professionalism. It is carried out considering many factors such as mechanical structure, spindles, control system, and part tolerances.

s******y

SANDAO MS adhesive series is professionally designed considering the following factors: the functionality of the control system, engineering forces, life cycle, utility, and manufacturability.

v******j

The creation of SANDAO MS adhesive series involves some advanced technologies. They include mechanical systems technology, automatic control technology, sensing technology, and servo-drive technology.

v******f

Before delivery, SANDAO ms polymer adhesive has to undergo a wide range of tests. It is strictly tested in terms of the strength of its materials, statics&dynamics performance, resistance to vibrations&fatigue, etc.

w******p

SANDAO MS adhesive series is manufactured adopting advanced machines. These machines mainly include punching machine, bending machine, stamping machine, milling machine, cutting machine, etc.

x******b

The product is known for its reliability. It can perform the same task in the same exact way endlessly without any fatigue.

Product Message

*Name

Phone

*E-mail

*Content

hot-sale MS adhesive seriessealanteffectively for fixing products